All Activity

I'd like to thank all of you who have contributed to this query. Despite the simplicity of applying sealant to the area, I feel that I won't get away with it when the car goes for inspection. I'm leaning toward fabricating a two piece steel cover that can be attached either side of the hole and possibly adding some heat sheild material to it or a flue seal. Either way I reckon that the area needs something to negate heat flow into the cabin. 🙃

Those plugs are ‘oldies but goodies’….NICE!

The J-12Y plugs are for an Avanti and are colder than the H-14Y plugs. IIRC the H-14Y are correct for a regular 289 or 259. --Dwight

I sent one to Switzerland a few years ago, the only metric gauge was the speedometer. oil was still PSI, and temp was Fahrenheit.

I aquired two sets of spark plugs, supposedly one set for a supercharged 63 or 64, the other for a 58-64. Neither number in my workshop manual. Confirm or deny? Mike

Mine is for sale!,

😂 ... I can try

My 1980 had the cow catcher bumper when I bought it in 1992.

Hi Tom, I've never had my evaporator out so I don't know what mine looks like. If it were mine I would just clean all the old stuff off of the pan. Then give it a coating with something watertight and reinstall it. I think you would be just fine. Best of luck, John C.

Deal. Send me a private message with your name and address. I'll break them down into manageable bundles and box them up in multiple boxes for shipping.

Ha ha!!!!!!!!!!

I'd take them and pay for the shipping if you'll get them boxed up for FexEx or UPS.

One solution................You did say "every input appreciated!"

It just dawned on me what the cut out is for, on cars with stick shift the clutch rod comes thru a hole next to steering colume which it appears was cut open, heres a picture of my 63, not cut open with clutch rod sticking out.

You have to remember...back when the Avanti was built Studebaker (and other car makers) were using pretty skinny tires...not those with wider footprints like they do now. It took less effort to turn the wheel regardless of whether equipped with power steering or non-power.

Heck, I often run 45 psi in the front. If you’re really worried just drop it to 44. 🤫

Yah, most radials I've used ( Michelin) have a 44 psi cold limit. Due to the weight distribution ratio, It would make a lot of sense to bump in front. I'd try 38 or so, for starters

Hi, by Avanti has been delivered to Europe right at the beginning in 1963, to Milano, Italy. So, althoug being an American car, it was never in use in the US. Currently it has the speedometer in kilometer per hours (KPH) but the temperature gauge is in degree Fahrenheit. Does anybody know if this has been like this back then or have there also been temperature gauges with degree Celsius? Just curious as the mix of European and US metrics in my car is interesting and unusual.

I recently rebuilt my R2 and added A/C to it. It had had the blower pulled years ago and an original A/C unit installed. I used the original evaporator and condenser a Sanden rear exit compressor and new lines. It has a stock 4 speed radiator (automatic transmission) with a transmission cooler in front of the condenser. The alternator is stock but much modified. All of the brackets and supports were made in house. Works great and the engine temps have stayed well under 190 to date. Everything clears the hood by 3/16 inch. not much but that is what the stock carb bonnet clears by. John C. The air cleaner is behind the headlight.

I installed a Vintage Air system on my car. Removed the battery to give me room to install it on the drivers side and added an extension to the power steering pump reservoir to get it up and out of the way.

I'd like to know more about the electric steering. I too have an R2/R3 with AC. it was modified many years ago by a previous owner. However, my car utilizes a hydraulic power steering unit. SO the pump is driven by the engine. Therefore, my setup is very congested and one of the brackets rub up against the bottom of the hood. So as I noticed from your photos, you had the ability to move the alternator where the power steering pump was, leaving plenty of room on top for the AC unit. I am really unhappy with my power steering setup, it's another mod and has caused many other issues below, it's a rack and pinion unit but interferes with the exhaust and oil pan. So the electric steering looks like an opportunity to fix a lot of problems.

45 lbs?….Whoa!!!!!

Does your Avanti have the optional fast steering? Manual-steering Avantis had a slower steering gearbox (more turns lock to lock) than power-steering Avantis. But, the power-steering gearbox was an option on a car ordered without PS. It was a rare option, but I saw one back when they were new. The quick-steering gearbox, without power assist, would certainly make an Avanti steer hard. The Avanti's production order should list that option, if it was ordered. --Dwight

thanks! - I will try that.

put more air in the front tires. Try 45 psi for a start.