RoyG Posted April 3, 2021 Report Share Posted April 3, 2021 I wanted to introduce myself and my new project! I recently purchased a "basket case" and plan to completely re build it. It sat in a barn for 18+ years and was apart before the previous owned purchased and stored it. The body is rough and the frame needs some work. It has the incorrect motor and wrong automatic transmission and the interior is "toast". My rational was that I'd end up redoing about everything on a #2 car anyway, so why not save the money and put one back in service that was probably destined to be a parts car? I have it up on blocks and have started stripping off parts that won't be reused. A prior owner started converting the front clip to square headlights, while trying to repair some body damage... the result was AWEFUL! I have a repair front panel and one original headlight bucket to use in an attempt to make the nose section correct again. Hog troughs have been ordered. I hope to have the body correct and ready for paint by fall... we'll see. The engine is a '64 289 from a passenger car which I plan to tear down and build back to R-3 specs. I'm thinking of converting from automatic to five speed standard and replacing the single tract rear with a 4.11 TT unit. My thinking is it will never be a matching number low mileage concourse car so why not make it over the way I want it? Glad to be an Avanti owning member at last. RoyG Link to comment Share on other sites More sharing options...
mfg Posted April 8, 2021 Report Share Posted April 8, 2021 Hello Roy!....Good to have you on board!.....Nice to bring one back that's been off the road for many years! There's a fellow on this forum (I believe his name is Bob Kline) who is parting out 3 or 4 Avantis should you need used parts....and I strongly recommend speaking with Dave Thibeault, an Avanti/Studebaker parts dealer here in Mass, for new parts and technical info......Tel# 978-897-3158...............Good luck! Link to comment Share on other sites More sharing options...
64studeavanti Posted April 8, 2021 Report Share Posted April 8, 2021 Roy, where are you located? If near either Tampa FL or Crossville TN, I may be able to help with parts, encouragement, and/or expertise. Link to comment Share on other sites More sharing options...
JLBKY Posted April 9, 2021 Report Share Posted April 9, 2021 2 hours ago, 64studeavanti said: Roy, where are you located? If near either Tampa FL or Crossville TN, I may be able to help with parts, encouragement, and/or expertise. Parts!? I'll be in Indian Rocks Beach starting on the 17th. How do I contact you? John Link to comment Share on other sites More sharing options...
64studeavanti Posted April 11, 2021 Report Share Posted April 11, 2021 I live just North of Parrish on 301. Send me a list and I will check to see what I have. Link to comment Share on other sites More sharing options...
JLBKY Posted April 13, 2021 Report Share Posted April 13, 2021 I sent you a P.M. Thanks John Link to comment Share on other sites More sharing options...
RoyG Posted April 19, 2021 Author Report Share Posted April 19, 2021 Hello Everyone, thanks for the responses, I should have checked sooner! I am in central Massachusetts. I made contact with Dave T. late last week and am meeting him Tuesday to pick up a driver's side door. Dan Booth (Nostalgic) has been awesome help with NOS body parts so far. Hope to pull the motor this weekend and then start repairing the damaged body. So far I've found the vendors that advertise in Avanti to be great to work with. My immediate goal is to get the fiberglass work done and the car in primer this summer while at the same time stripping all the old parts off the frame so I can wire brush, paint, and then start installing all new brakes, fuel lines, and perhaps upgrade suspension. At the same time I have a lot more research to do, and I'll be looking for opinions (please see "suggestions?" posts) from members that have already been down this road. Link to comment Share on other sites More sharing options...
Avanti83 Posted April 19, 2021 Report Share Posted April 19, 2021 Replied to your other post. Link to comment Share on other sites More sharing options...
studegary Posted April 19, 2021 Report Share Posted April 19, 2021 Refer to my responses in your other post. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now