Cbitz233 Posted June 10, 2018 Report Share Posted June 10, 2018 In middle of replacing coil springs on my 83. Need to get new king pin bearings for the inside of the spindle that the ball joint and tierod connect to. Can't seem to findn were to get them does anybody know where I can find them. Thanks Link to comment Share on other sites More sharing options...
studegary Posted June 11, 2018 Report Share Posted June 11, 2018 1 hour ago, Cbitz233 said: In middle of replacing coil springs on my 83. Need to get new king pin bearings for the inside of the spindle that the ball joint and tierod connect to. Can't seem to findn were to get them does anybody know where I can find them. Thanks They are in the SI catalog and other Studebaker and Avanti vendors will also carry them. A 1983 Avanti suspension is like a 1964 Studebaker Avanti suspension. Be sure to replace the thrust washer/bearing while you are in there. Link to comment Share on other sites More sharing options...
silverstude Posted June 11, 2018 Report Share Posted June 11, 2018 Hope you have a shop manual handy. There are shims included in the kingpin rebuild kit. You also have the ones installed in your suspension now. The shims are used to adjust the thrust bearing clearance, which if is not correct will grind the bearings into dust. Link to comment Share on other sites More sharing options...
Cbitz233 Posted June 11, 2018 Author Report Share Posted June 11, 2018 1 hour ago, silverstude said: Hope you have a shop manual handy. There are shims included in the kingpin rebuild kit. You also have the ones installed in your suspension now. The shims are used to adjust the thrust bearing clearance, which if is not correct will grind the bearings into dust. Where can I acquire a shop manual?? Thank you for the help Link to comment Share on other sites More sharing options...
studegary Posted June 11, 2018 Report Share Posted June 11, 2018 31 minutes ago, Cbitz233 said: Where can I acquire a shop manual?? Thank you for the help You can get the Studebaker Avanti shop manual, that applies to much of your car including the front suspension, on either paper or CD from SI and perhaps other vendors. Link to comment Share on other sites More sharing options...
WayneC Posted June 11, 2018 Report Share Posted June 11, 2018 There are usually a few for sale on eBay as well, search "Avanti (shop, workshop, service) manual".... you want the one that says "Workshop Manual" on the cover. About $40 to $50 shipped. While you're at it, get an Avanti parts manual as well. Some of the information won't pertain to the '83, but much of it will, and its all the information we've got, aside from vendors and a few websites. Link to comment Share on other sites More sharing options...
Avanti83 Posted June 11, 2018 Report Share Posted June 11, 2018 12 hours ago, WayneC said: There are usually a few for sale on eBay as well, search "Avanti (shop, workshop, service) manual".... you want the one that says "Workshop Manual" on the cover. About $40 to $50 shipped. While you're at it, get an Avanti parts manual as well. Some of the information won't pertain to the '83, but much of it will, and its all the information we've got, aside from vendors and a few websites. Excellent advice. Also remember you can use any Chevy manual from the same year or one earlier for engine and transmission issues. Link to comment Share on other sites More sharing options...
Jim78 Posted June 12, 2018 Report Share Posted June 12, 2018 Studebaker International offers a CD that includes both the shop and parts manuals for $19.95. Link to comment Share on other sites More sharing options...
Mistro Posted June 13, 2018 Report Share Posted June 13, 2018 17 hours ago, Jim78 said: Studebaker International offers a CD that includes both the shop and parts manuals for $19.95. Not seeing it and I just looked. Does anyone have a link? Thanks. Rgds, Mike Link to comment Share on other sites More sharing options...
Jim78 Posted June 13, 2018 Report Share Posted June 13, 2018 Go to http://www.studebaker-intl.com/catalog.html Download the pdf file for "Manuals and related items" and go to page 16, or search part # 801202 for the CD. Link to comment Share on other sites More sharing options...
WayneC Posted June 15, 2018 Report Share Posted June 15, 2018 Jim, its on page 27, lower right corner. Search doesn't seem to work for me. Link to comment Share on other sites More sharing options...
Jim78 Posted June 15, 2018 Report Share Posted June 15, 2018 (edited) 10 hours ago, WayneC said: Jim, its on page 27, lower right corner. Search doesn't seem to work for me. To clarify, it's on page 27 of the catalog, which shows up on page 16 of the .pdf file. On the website itself, you can click on "SHOP" and enter 801202 in the part# block. Edited June 15, 2018 by Jim78 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now