Oil leak from 289

[Hogtrough]

My '63 has an engine that was fully rebuilt in the early 2000's and driven little since. There are oil leaks from the engine and I've checked and replaced the oil pressure gauge hose and tightened the pan bolts. It seems to leak even when just sitting in the garage which seems strange to me - shouldn't the oil level when sitting around be below the crankshaft seals? What is the most likely source of the leaks? (which at a glance appear to be front and rear seals)

[Leo B]

I have been told that one way to see the source of a leak is to wash the potential leak area well and when it is dry, spread some powder (talcum powder) over the area. This will reveal the location of the leak. I have not tried this yet, but I plan to do so.
I just noticed the same in my garage and it was the the drain plug.

Edited 7 hours ago by Leo B

[Hogtrough]

Drain plug would make sense on mine since it's in the general area and below oil level, but it is very tight and has a copper washer. I'll give it another look though

[mfg]

Studebaker’s like to mark their territory!