-
Posts
528 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by wildfelr
-
-
RQB3263/81/305/700r4 Well I did exactly that on RQB3263 some 6 or 7 yrs ago..... I have bored you all with thoes details here before .... BUT.... the change is simple ... install a non-electronic Q-Jet less than $200 DIRECT bolt on to existing manifold /one wire ....remove all the wires/components computers ect associated with it... I installed a quality after mkt. distributor/wires, MSD I think ....and havent touched it in years.... I also did the cam for a Crane RV Torque cam/lifters/springs but thats another story for another day... BTW the 305 needs all the help it can get especially it you have an OD trans (700R4).... keep in touch ....BILL
-
RQB3263/81/305 has drain holes .... BILL
-
RQB3263/81/305 ....... GOOD AFTERNOON ALL ....I just returned from the SDC/AVANTI zone meet in Gainesville, fl...and amongst other things the spoiler got numerous positive comments ....I am happy ....as for the method of installation... I studied it and decided the 10-32 machine screws (#10 aircraft bolts 10 each in my case cuz I got plenty) was the best and easiest for my install... others may take a different approach but it worked well for me and is easily removable tomorrow to go to the paint shop.... i will post a finished pic after paint and re-installation and then I can move on to my next Avanti project.... possibly VOGUE GOLD LINE tires.....you-all have a good day...keep up the good work ....BILL
-
RQB3263/81/305 ..... Installed with about a dozen 3/16 machine screws with OD washers and SS nyloc nuts...... removal will take me about 10 min .... No brackets .... BILL
-
-
YES, YES, AND YES....the front turn signals are now mounted in the nerf bar/cow catcher shock tube and the orig turn signal light replaced the one on the side of the fender they are slightly larger and wired to function as turn sig.....when I had the car painted 8 yrs ago I did the removal of everything and decided it looker better without the bumpers ect ... good decision and probably saved me thousands $$.. the new 56 caddy air cleaner cover is cool but not without modification to make it clear the low Avanti hood line ..... BILL
-
PICS as promised...... basically a full day to get to this point.... remember no two Avantis are the same dimensionally they are custom built and I believe there build tolerance was 1/4 inch+-.... so a part fabed to fit one may or may not fit perfectly..... then you add in differences caused by collision repairs and other mods made over the long life of Avanti and you could end up with a struggle .or an easy afternoon..... This installation was somewhere in between......I will get it back on the road maybe later today for the SDC event in Gainesville, Fl this weekend....then it has to come apart to be painted the same color as the car ........not a big deal.....HAPPY MOTORING.... BILL
-
-
RQB3263/81/305 ..... Check out VOGUE gold line white wall.... there s are as close as you may fine... I plan on a set at the end of the year....BILL
-
RQB3263 .... This panel is made if fiberglass but could have just as easily been .040, ,050, .063 aluminum..... BTW #1 cylinder is left forward ....
-
RQB3263/81/305....... Attached is pic of access panel installed in the wheel well behind the left front tire It gives easy access to left sparkplugs and steering box adjuster...... panel is attached with small S/S machine screws (#8 or #10) into clip nuts ...unfortunately it does req. the removal of the L front wheel....best wishes ....keep up the good work ....BILL
-
RQB3263 .... <michaeltp1@verizon.net> ....enjoy
-
RQB3263 YES VERY possibly ... I will post his email here.... and you can discuss it with him....if he gets enough interest maybe ..... BILL
-
RQB3263/81/305 .... WELL after a long (7 or 8 year) search for the front spoiler has arrived.... I was contacted by the original manufacturer in Pennsylvania who had the mold and one part... It just arrived very well packaged and appears perfect with brackets etc....so when 3263 comes home from paint touch up etc. I will have a project installing it... I will post pics here when that happens...... attached are pics of 2 Florida Avanti with this spoiler installed for reference..... Later Gator...BILL
-
RQB3263/81/305 ALSO...i cammed up the 305 for the torque needed to operate in OD.... ALSO completely depolluted ...installed real true dual exhaust .... removed any and all computers and installed a non electric q-jet carb and dual electric cooling fans ..... ALSO I seldom use the A/C keep up the good work .....BILL
-
RQB3263/81/305 ..... WITH 700R4 OD and 2.72 rear gear I get 20MPG on a good day .....love it
-
RQB3263/81 ..... GET A CRAFTSMAN OR SIMILIER speed handle and attach homemade extensions ... or just several 3/8 X 12 inch extensions can be hooked together and stored in a small location...... bill
-
-
RQB3263/81 i BOUGHT 2 MIL-SPEC scissor jacks new on ebay.... not cheap Chinese crap and then mfg a 3' long handle to match....pics if req..... BILL
-
RQB3263/81/305 wildfelr@copper.net ... RQB3263 is in the paint shop now for minor repair and touch up..... Mike and I will be getting together on the spoiler installation soon as 3263 returns home..... I will post pics and details in the 65-83 forum.... stay tuned
minor repair.....suggestion.....have the garage door up high enough to clear the top of your car....I did not ....the good news... I did not break the glass!!....... stay tuned for more Avanti adventures with Bill...
-
RQB3263/81/305 wildfelr@copper.net ... RQB3263 is in the paint shop now for minor repair and touch up..... Mike and I will be getting together on the spoiler installation soon as 3263 returns home..... I will post pics and details in the 65-83 forum.... stay tuned
-
WOW GREAT JOB..... I wish I had that much energy ...... I wish TURNER had a rear disc kit for my 81 RQB 3263....keep tie pics coming ......BILL
-
Too many cars, not enough lifts, or you live too fay north...... (winter....whats that ?)
-
YES.... MIKE MYER did both the control vlv and actuator for me 5 or 6 yrs ago .... perfect.... if your close drive over to Duncan Falls and giter done ... mike is the mechanic...wont take long .... quality folks.... BILL RQB3263....
SCOOP/FRONT SPOILER FINISHED
in 1965-83 Avanti
Posted
RQB3263/81 .... finally after a 7 or 8 year search the original mfg contacted me and I purchased I believe the last spoiler !! But he does have the mold....previous posts detail this project and all finished now..... and how to get in touch with Mr. Phillips in Penn..... finished pics here and maybe more to come ....Thanks you all...BILL