mfg Posted July 26, 2020 Report Posted July 26, 2020 What two things were changed (concerning the frame ) on the '83-'85 Avantis that actually made them MORE susceptible to 'rusting' and 'rotting out' than the earlier, '63-'82 Avanti frames?
studegary Posted July 26, 2020 Report Posted July 26, 2020 Addition of X-member to Lark type frames. Changing the length of the frames.
mfg Posted July 27, 2020 Author Report Posted July 27, 2020 5 hours ago, studegary said: Addition of X-member to Lark type frames. Changing the length of the frames. No, not due to those changes.
mfg Posted July 27, 2020 Author Report Posted July 27, 2020 2 hours ago, 1963r2 said: Gauge of steel used. No, not a change in steel thickness.
brad Posted July 28, 2020 Report Posted July 28, 2020 Fully welded on the edges of the bottom flange.
mfg Posted July 28, 2020 Author Report Posted July 28, 2020 13 hours ago, brad said: Fully welded on the edges of the bottom flange. Yes!....fully welded edges gets you 1/2 way there! Can anyone come up with the the other issue? (or change?) HINT!....Something was eliminated!
Stacey Posted July 28, 2020 Report Posted July 28, 2020 Should be drain not drane??? I typed too fast and didn't re-read what I wrote.
mfg Posted July 28, 2020 Author Report Posted July 28, 2020 1 minute ago, Stacey said: Should be drain not drane??? I typed too fast and didn't re-read what I wrote. No problem, I do that all the time! And you are CORRECT!.......for whatever reason the factory left out the holes in the lower plate. Brad & Stacey got this one!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now