AG-R3

The upper rod is attached to the lock, the lower to the door handle

Owned by the Cloudflare user and has 4 associated IP addresses, the first two (172.67.134.147/104.21.6.68 ) are located /originating in or near San Francisco, CA. Reason for being unknown, but he spent a little change getting this set up...

Ed, I tried to send you a PM, but it wouldn't go. if you would, email me through the S-I-O website. /RJ

There has to be a solution. New car dealers always try and push those extra packages before you get to the payment guy.. They definitely have something for the windshield that cuts down on the UV and lessens impact/chip of a stone and reduces the headlight glare...

Sorry abt that.. I guess that's why they don't show the front..

You can try this one https://www.summitracing.com/parts/UAC-SW3004C They are also on Amazon

http://www.studebaker-info.org/Tech/Aircon/murray35701.jpg

There is info regarding the original install templates at https://studebakerdriversclub.com/?page_id=25049

Nice job!

Why not contact someone in the Keystone Region Chapter. You's are right in the middle of a lot of Studebaker owners. I'm sure they would be glad to help... https://sdc.cornerstonereg.com/Chapter/ViewChapters?loc=PA

What would be the serial number ? ( 63R-???? )

Yah, most radials I've used ( Michelin) have a 44 psi cold limit. Due to the weight distribution ratio, It would make a lot of sense to bump in front. I'd try 38 or so, for starters

Here is an archive of notes on the 89.. http://studebaker-info.org/rjtechjan2023p1.html#89av

Don't know if you saw this on the SDC Forum some notes here http://studebaker-info.org/rjtechjan2023p1.html#89av