Jump to content

Recommended Posts

Posted

If you've checked around with the usual parts vendors and come up empty, then I'd imagine you'll probably have to wait and see if one comes available on ebay.  Those things are pretty rare, and accordingly pricey when they do turn up.

Posted

I'm still not convinced that an aftermarket one wouldn't be a good choice. While not OEM there's about 12 people in the world that could see the difference and it would have all new parts not ones over 50 YO. It should be pretty easy to connect as the Avanti's have a rag joint and the wiring terminates in a Chevy connector that could be adapted to about any harness.

They are available in billet or plain metal and some don't have the key in the column also.

Posted

As an owner of a shop that builds street rods and also an Avanti owner I am sure you can use a Flaming River tilt column. They are paintable and can be ordered in either a 2 inch or 1 3/4 inch diameter tube. They also make in diff lengths. The only issue is the spline is GM for steering wheel.

Posted

Summit Racing or Jegs should get you a Flaming River steering column...they also carry Ididit steering columns as well.  Compare the two and see which might be best for you.

Posted

Keep in mind if you want to retain the original steering wheel then the spline count is the same as Ford. GM has a different spline count to the Stude.

Pb

Posted (edited)
3 hours ago, Bweryarryo said:

Thanks guys,wasjunk, can you tell me where to look for the flaming river one?

This should give you everything you need to know. You can click through the different styles to see there complete line and there are a ton.

https://www.flamingriver.com/index.php/products/c0002

Once you have found what you want, you can shop model and price to see if there is a better option. There are also a number of others that build/offer columns, Google is your friend here.

Edited by Avanti83
Posted

You can check with Flaming river online or feel free to call or message me and I will do what I can to help you. They can be modified to about any configuration or length to suit your needs. Parts for the rag joint can be  obtained also to help  if needed   Dave Carnock  d.carnock@carnockcreations.com Carnock Creations   Des Moines Iowa 515-265-0293

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...