[Window Channel in Vent window Replacement?]

I had a78, the sunroof is a pain in the butt.

[1963 Headlight gasket?]

Does anyone know the correct thickness for these, the ones I have don't fit well, and seem too thick. Thanks 

[63 Window Regulator Bolts and Washers?]

I got them, all fixed up. Thank you all. 

[Windshield Washer?]

Any of you know what the correct hose size and routing from the floor to the washer bag is? Thank you

[1963 Avanti Battery Ground Cable?]

Thank you for reply.

[1963 Avanti Battery Ground Cable?]

I know you can get them from the vendors and even some parts stores. I was looking at the block off plate, thought that was a strange place to ground it the battery.  Again, thank you this one has it running to the bellhousing on the left side.

[1963 Avanti Battery Ground Cable?]

What is the correct length and where does it attach to the block? Thanks

[Window Regulator Access?]

Thank you.

[Window Regulator Access?]

Any of you know what the original cover was covering the rectangle access opening at the bottom of door? Was it just tape or something else? Thank you

[Wanted Escutcheon P/N 1319242]

Looking for 4 of these either NOS or used in good condition. The reproductions out there are not made correctly both holes in them are undersized, and the separator P/N 1312647 won't fit. Thank you

[63 Window Mechanism?]

Thank you, I am getting it back together left side is done working on the right.

[63 Window Regulator Bolts and Washers?]

Anyone have some bolts and Pyramidal washers for the door regulator and idler laying around they don't need?  Forgot size 1/4" hole 3/4" diameter. Thanks

[63 Window Mechanism?]

Thank you it does. yours is power, mine is manual the part that I was concerned about is the long arm from window regulator, it was bent pretty bad, after I straightened it, I am having a hard getting time getting the idler arm hooked up.  Anything I should know? Thanks

[63 Window Mechanism?]

I don't know but most likely yes, Thank you

[63 Window Mechanism?]

Anyone have a picture of the window mechanism outside of car preferably the right-side? Would like to know the shape of the long flat piece off the 1350844-window regulator. Thanks

[1963 Avanti Parts?]

Canceled.

[Roll Bar Crash Pad?]

Looks like a good fix. Thanks for your response

[Roll Bar Crash Pad?]

Yes, the clips are there in a long-slotted hole, which lets the clips fall out nothing on the ends. Thanks for reply

[Roll Bar Crash Pad?]

Do any of you know what is supposed to secure the two ends of these to the side of the car? Thanks

[63-64 Power Steering Fluid?]

Thank you

[63-64 Power Steering Fluid?]

I thought I posted this, but I can't find it. Any substitutes for type "A" transmission fluid? Thanks

[Window Channel in Vent window Replacement?]

Yes, I am not having a good time, rivet replacement is a real bitch, pardon the English!

[1963 Heater Control Valve?]

Thank you, I was afraid of that, mine is 3/4 of course.

[Headlight Rubber Seals?]

I did find out that inside of the trim ring is marked to show top of ring, very hard to find.

[1963 Heater Control Valve?]

R2W55, meant to ask is yours's 5/8 or 3/4 heater hose? Thanks