[63 Window Mechanism?]

Thank you, I am getting it back together left side is done working on the right.

[63 Window Regulator Bolts and Washers?]

Anyone have some bolts and Pyramidal washers for the door regulator and idler laying around they don't need?  Forgot size 1/4" hole 3/4" diameter. Thanks

[63 Window Mechanism?]

Thank you it does. yours is power, mine is manual the part that I was concerned about is the long arm from window regulator, it was bent pretty bad, after I straightened it, I am having a hard getting time getting the idler arm hooked up.  Anything I should know? Thanks

[63 Window Mechanism?]

I don't know but most likely yes, Thank you

[63 Window Mechanism?]

Anyone have a picture of the window mechanism outside of car preferably the right-side? Would like to know the shape of the long flat piece off the 1350844-window regulator. Thanks

[1963 Avanti Parts?]

Canceled.

[Roll Bar Crash Pad?]

Looks like a good fix. Thanks for your response

[Roll Bar Crash Pad?]

Yes, the clips are there in a long-slotted hole, which lets the clips fall out nothing on the ends. Thanks for reply

[Roll Bar Crash Pad?]

Do any of you know what is supposed to secure the two ends of these to the side of the car? Thanks

[63-64 Power Steering Fluid?]

Thank you

[63-64 Power Steering Fluid?]

I thought I posted this, but I can't find it. Any substitutes for type "A" transmission fluid? Thanks

[Window Channel in Vent window Replacement?]

Yes, I am not having a good time, rivet replacement is a real bitch, pardon the English!

[1963 Heater Control Valve?]

Thank you, I was afraid of that, mine is 3/4 of course.

[Headlight Rubber Seals?]

I did find out that inside of the trim ring is marked to show top of ring, very hard to find.

[1963 Heater Control Valve?]

R2W55, meant to ask is yours's 5/8 or 3/4 heater hose? Thanks

[Headlight Rubber Seals?]

Do any of you know what the correct thickness and size should be on these? The ones on the 63 car I got seem to be too thick and don't fit well. Thank you

[1963 Heater Control Valve?]

Thank you.

[Window Channel in Vent window Replacement?]

Have any of you changed one of these out? Thanks

[1963 Heater Control Valve?]

Anyone have an extra one laying around that is functional and don't leak? Thank, you. 

[Jack Stand Placement and Jacking Points?]

Thanks

[Jack Stand Placement and Jacking Points?]

Does anyone know of a diagram for placement on the frame? I have the DVD shop manual and didn't see it in there. Thanks  

[Door Fit?]

Thank you for the advice.

[Door Fit?]

Thank you, yes on the shop manual.

[Door Fit?]

Any of you had any experience on door fit adjustment? Thanks

[Brake rotors for 1964 R1]

I had a 78, they were the same, keep track of the shims.