Bracket Locations (cylinder heads)

[Rick Allen]

Pretty sure these brackets are attached to the cylinder head bolts at some location on the heads (R2 engine), does anyone have a diagram or can tell me where they should be and/or what attached to them ?

Edited 20 hours ago by Rick Allen
Additionspictures

[Bob Preston]

A picture might help. Also recommend getting your hands on a workshop manual. 

[Rick Allen]

21 minutes ago, Bob Preston said:

A picture might help. Also recommend getting your hands on a workshop manual. 

Yes, they didn't upload the 1st time, they did now,,,thanks

[regnalbob]

3 hours ago, Rick Allen said:

Pretty sure these brackets are attached to the cylinder head bolts at some location on the heads (R2 engine), does anyone have a diagram or can tell me where they should be and/or what attached to them ?

 

 

The long one is the air cleaner support.

The others are for the ignition shielding.

[Bob Preston]

18 hours ago, Rick Allen said:

Yes, they didn't upload the 1st time, they did now,,,thanks

Would you send measurements for the air cleaner support? I need to fabricate one. Thanks.