WANTED: Door Sill rubber pads mounting material

[Kodjo]

I have the rubber parts but not the stainless metal parts holding it to the car. Doen anyone has some to spare?

I live in the Netherlands and would like to make my '69 like new again!

 

Thanks!

[Dwight FitzSimons]

You might try Myer's Studebaker in Ohio.  Jon & MIke Myer have parted out many Avantis.

--Dwight

[Kodjo]

7 hours ago, Dwight FitzSimons said:

You might try Myer's Studebaker in Ohio.  Jon & MIke Myer have parted out many Avantis.

--Dwight

I know, but the price and product are completely out of balance for me. I don't necessarily need new ones either; good used ones are nicer.

[64AvantiR2]

I used a school bus vinyl center floor runner for mine and it looks original and very good. Available at all the school bus parts distributers in Indiana, Illinois, and Iowa. 

[AG-R3]

I'll bet you can find something in here, if not... call them and they can do magic...

https://www.restorationspecialties.com/assets/pdfs/2025_PDF_Catalog_RSSI.pdf

 

[John Brissette]

My reading of the original post, is that Kodjo is needing the stainless trim that goes with the rubber sill.

Kodjo, that piece is just a "L" shaped piece of stainless. Easy to make if you have access to a metal brake. 

I happen to have that piece off of my car, so I've measured it and here are the numbers.

42 " long

6 Holes.....My guess is you already know that, as there should be 6 holes in the body

24 Gauge  (.0239 thick)

The long leg is 15mm......The short leg is 6-7mm

Hope this helps

John

[Dwight FitzSimons]

42 inches is 1,07 meters to a European.  (I don't know why Europeans have the period & comma backwards, but that would be a subject for another day.)

--Dwight