TMA62 Posted 16 hours ago Report Posted 16 hours ago I have an early R-1 (1289) and the power steering pump is beginning to leak. I am having trouble finding the source of the leak since the pump is right next to the radiator fan. The wind from the fan essentially sprays the leaking brake fluid all over the pump, battery and underside of the roof. Question: Where are the typical locations of leaking power steering pumps that I should look for? Thanks in advance!
psdenno Posted 4 hours ago Report Posted 4 hours ago Start with the pulley shaft seal and then check the hose connections. Pulley shaft leaks are typical.
mfg Posted 57 minutes ago Report Posted 57 minutes ago I agree with psdenno… and shaft seal not very hard to change once pump is off.
brad Posted 5 minutes ago Report Posted 5 minutes ago (edited) Be careful upon reassembly. the shaft has a very sharp edge that can cut the new seal. I also look at the shaft to make sure it isn't grooves where the seal rides. I have had to install ready sleeves to repair them in the past. Also look at the reservoir to pump body gaskets. They are square shouldered "O" rings. Be sure the lid is vented properly, or it will leak again. Aftermarket repair kits sold by All the vendors use the wrong cover post stud gaskets. Edited 3 minutes ago by brad
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now