Jump to content

A Magical Mystery Tour, Pt 1


Recommended Posts

The door may have been reupholstered at some point...covering where the switch goes...or the adjustment switch could have been located elsewhere such as under the dash.  Maybe the wiring is for something else someone might have installed?  Maybe the wiring harness included those wires regardless of whether it was to be equipped with power mirrors?  

The best way to find out whether the car was factory equipped with power adjustable outside mirrors is to get a copy of the build sheet from Nostalgia Motors...it will show how the car was originally equipped.  

Link to comment
Share on other sites

For whatever reason a previous owner had the power mirror removed and the door panel reupholstered to hide where the switch was.  Are you sure the console isn't wired for mirror switches?

Link to comment
Share on other sites

Posted (edited)

Unfortunately there's no outside mirror control in the console. If you look at the door panel, you'll see a cut out and mounting ring for the switch. There's also a cut out for the power door lock switch (blue tape used to identify both). Another owner also removed the power door locks switches. The wiring and actuators are there, but without a switch, no can use.

Pure hackery as evidenced by the original equipment list posted above.  Many thanks to the Avanti Nation for answering my questions 🙌

 

 

Edited by Desert Driver
Link to comment
Share on other sites

I’ve found one of the biggest problems with older cars is that you have to undo what past owners have done before fixing it right.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...