Cbitz23 Posted April 9, 2018 Report Share Posted April 9, 2018 Where's the best spots to jack up an avanti Link to comment Share on other sites More sharing options...
WayneC Posted April 10, 2018 Report Share Posted April 10, 2018 I generally place the jack under the frame beneath the firewall, or just in front of the frame kick-up for the rear wheels. I prefer to use ramps if the car is mobile and I'm not removing a wheel. Link to comment Share on other sites More sharing options...
studegary Posted April 10, 2018 Report Share Posted April 10, 2018 If you want to lift everything together, you can jack the front under the A-arms and the rear under the spring plate where it mounts to the axle. Link to comment Share on other sites More sharing options...
silverstude Posted April 12, 2018 Report Share Posted April 12, 2018 one jack on the axle pot, the other on the center pin of the front crossmember. Once up, place jack stands at the frame points mentioned above Link to comment Share on other sites More sharing options...
Cbitz23 Posted April 21, 2018 Author Report Share Posted April 21, 2018 Thank you guys Link to comment Share on other sites More sharing options...
dynolou2 Posted April 22, 2018 Report Share Posted April 22, 2018 I also use the center pin and center of rear diff.. I place front stands under under lower a arms, for the rear depending if you are working on rear axle, place at front of rear spring mount. If you don't I place stands under the sway bar mount on the rear spring pads. My special built stands start at 19 1/2 " and telescope to 26 1/2 " Lou Cote Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now