A83 Posted July 22, 2017 Report Share Posted July 22, 2017 I read an old post on replacing the center cap with an Avanti emblem - I think Gunslinger posted to buy the Magnum center caps and replace them with Avanti emblem. Can you tell me how this is done? And is it a particular emblem of the red and blue studebaker S I see on several sites? Thank you Kevin Link to comment Share on other sites More sharing options...
Jim78 Posted July 22, 2017 Report Share Posted July 22, 2017 One option is to retain the Magnum center caps (straight or spinner type) and glue a 1-3/4" diameter Avanti logo into the center. I did mine several years ago with medallions purchased from Studebaker International. They had both black on silver and silver on black. Their part numbers were 26-006 and 26-001. I see the 26-006 is still listed on their site, but not the 26-001. Price is $2.00 ea. I didn't trust the self-adhesive backing, and applied mine with clear silicone. Link to comment Share on other sites More sharing options...
A83 Posted July 22, 2017 Author Report Share Posted July 22, 2017 Thank you very much they look great will try to order some now Kevin Link to comment Share on other sites More sharing options...
A83 Posted July 22, 2017 Author Report Share Posted July 22, 2017 Do the spinner and straight caps have retainer clips for installation or are t hey installed a different way Thank you Kevin Link to comment Share on other sites More sharing options...
Deano Posted July 23, 2017 Report Share Posted July 23, 2017 Around 2 1/2 years ago I replaced the spinner type centers with the conventional type Magnum centers without any logo. Studebaker Intl was out of the larger Avanti plastic stick on logos so I had to get the smaller ones which are 1 1/16" dia. and in black with gold lettering. I have not had any of them come off and they still look good. The Magnum centers are attached with small bolts from the inside, so you have to remove them with the wheel off of the car. The centers have to be removed for any work done as in getting new tires and balancing or fixing a flat. Dean Link to comment Share on other sites More sharing options...
A83 Posted July 23, 2017 Author Report Share Posted July 23, 2017 Thanks very much apreciate it. Kevin Link to comment Share on other sites More sharing options...
Jim78 Posted July 24, 2017 Report Share Posted July 24, 2017 On 7/22/2017 at 1:10 PM, A83 said: Thank you very much they look great will try to order some now Kevin Well, I figured that I might order a set of spares, while I was thinking about it. I ordered them on line, but got a call today telling me that they are no longer in stock. So, time for plan B, whatever that might be. Maybe we have a member who has the capability of making 1-3/4" Avanti logo decals. Link to comment Share on other sites More sharing options...
Gunslinger Posted July 24, 2017 Report Share Posted July 24, 2017 If SI doesn't have them, try Myer's Studebaker or Nostalgic Motors. More than one vendor carried them but if they're out of production inventories could well be depleted for all vendors. Link to comment Share on other sites More sharing options...
A83 Posted July 25, 2017 Author Report Share Posted July 25, 2017 SI just called to tell me they don't carry them so I will check nostalgic etc - appreciate any other ideas thanks Kevin Link to comment Share on other sites More sharing options...
A83 Posted July 25, 2017 Author Report Share Posted July 25, 2017 So do you glue the medallion over the existing magnum logo or take the logo out? Link to comment Share on other sites More sharing options...
Gunslinger Posted July 25, 2017 Report Share Posted July 25, 2017 You'll need to remove the old emblems and clean all of the residue from any old adhesive. If necessary, new center caps are available from sources like Summit Racing and you can put the new emblems in them. Link to comment Share on other sites More sharing options...
A83 Posted July 25, 2017 Author Report Share Posted July 25, 2017 Thank you ordered the new caps and found some small black Avanti medallions at the Studebaker museum store but they are listed as Quarter size - have calls into Nostalgic and Meyers Kevin Link to comment Share on other sites More sharing options...
Jim78 Posted July 25, 2017 Report Share Posted July 25, 2017 17 hours ago, A83 said: So do you glue the medallion over the existing magnum logo or take the logo out? I glued mine right over the Magnum logo, no muss, no fuss. I did, however, use clear silicone to glue them in. They have held up fine for a number of years. Link to comment Share on other sites More sharing options...
Gunslinger Posted July 25, 2017 Report Share Posted July 25, 2017 Here's the silver script on black background as a comparison... Link to comment Share on other sites More sharing options...
A83 Posted July 26, 2017 Author Report Share Posted July 26, 2017 They all look great just hope I can find some - thanks Link to comment Share on other sites More sharing options...
TED DIMON Posted August 6, 2017 Report Share Posted August 6, 2017 On 7/26/2017 at 3:52 AM, A83 said: They all look great just hope I can find some - thanks On 7/26/2017 at 3:52 AM, A83 said: They all look great just hope I can find some - thanks If push comes to shove, you can always put in Magnum 500 stickers that are available on EBay. I put these on three of my wheels since one was still well adhered. I am under the impression that the early II's came with the Magnum 500 stickers which are a little more colorful than the Avanti stickers. Link to comment Share on other sites More sharing options...
A83 Posted August 7, 2017 Author Report Share Posted August 7, 2017 Thank you. I called Meyers and they said they have a few left around twenty or so if anyone is interested. I believe they are the black lettering with the light background in the first picture and cost $3.00 each. Thank you all again. Kevin A83 Link to comment Share on other sites More sharing options...
A83 Posted August 11, 2017 Author Report Share Posted August 11, 2017 I put the spinners on - do you think they will loosen with time as the caps are bolted to the inside piece and pressured against the wheel but not actually locked in position on the wheel. Link to comment Share on other sites More sharing options...
Jim78 Posted August 11, 2017 Report Share Posted August 11, 2017 1 hour ago, A83 said: I put the spinners on - do you think they will loosen with time as the caps are bolted to the inside piece and pressured against the wheel but not actually locked in position on the wheel. I've had no problems at all with mine over 15,000 miles. Link to comment Share on other sites More sharing options...
A83 Posted August 11, 2017 Author Report Share Posted August 11, 2017 Great thanks Jim Kevin Link to comment Share on other sites More sharing options...
A83 Posted August 11, 2017 Author Report Share Posted August 11, 2017 Here is a picture of my spinner thanks to all A83 Kevin Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now