Avanti Windows!

[mfg]

Can anyone name three flaws in ‘early’ Stude Avanti power window systems which Studebaker identified and corrected later during the Avanti production run?

[Dwight FitzSimons]

I can name one: On '64s the PW wiring from the door to the door jam was protected by a steel housing.  On '63s the wiring was just wrapped in tape.

Some time in Avanti II production the inner door panel was reinforced by double fiberglass.

--Dwight

[mfg]

55 minutes ago, Dwight FitzSimons said:

I can name one: On '64s the PW wiring from the door to the door jam was protected by a steel housing.  On '63s the wiring was just wrapped in tape.

Some time in Avanti II production the inner door panel was reinforced by double fiberglass.

--Dwight

Yes!… the protective cable housing is one!

Two more …..?

[Nelson]

Door inner fiberglass panel cracking.

[mfg]

1 hour ago, Nelson said:

Door inner fiberglass panel cracking.

It sure did!!… But what was ‘added’ to help remedy this?

[Nelson]

The ones I’ve seen have doubled up on the fiberglass in the crack area.

[mfg]

1 hour ago, Nelson said:

The ones I’ve seen have doubled up on the fiberglass in the crack area.

I’ve seen fiberglass repairs reinforcing an Avanti’s inner door structure… but I always thought those repairs were done ‘in the field’ after car was sold…. I’m not really sure about that.

Anyway, I was looking for three items other than added fiberglass reinforcement, the protective wiring shield in the door hinge area being one.

Edited 3 minutes ago by mfg
Added text