mfg Posted February 2 Report Posted February 2 What two features make the design of the carburetor air box used on the '57 Stude Golden Hawk superior to the carb air box design used for the Avanti R3 engine?
Nelson Posted February 2 Report Posted February 2 Mixture screws are accessible without opening the air box.
mfg Posted February 2 Author Report Posted February 2 51 minutes ago, Nelson said: Mixture screws are accessible without opening the air box. Yes!..that's one for sure..... Now, how about the other even more important (in my opinion) feature?
brad Posted February 3 Report Posted February 3 (edited) Fuel drains, also the hard lines for fuel and vacuum are hard plumbed without the need for rubber seals. Edited February 3 by brad
mfg Posted February 3 Author Report Posted February 3 2 hours ago, brad said: Fuel drains, also the hard lines for fuel and vacuum are hard plumbed without the need for rubber seals. Yes exactly!.....In general use, rubber grommets with steel fuel lines passing through them can degrade with time...The '57 GH fuel delivery setup was pretty much 'bullet proof'! PS...As an economy measure, Studrbaker went to the 'grommet' setup on the 1958 Golden & Packard Hawks.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now