brad Posted April 17, 2014 Report Share Posted April 17, 2014 Making a serpentine supercharger and accessory drive for this one. Has AC too! Link to comment Share on other sites More sharing options...
Gunslinger Posted April 17, 2014 Report Share Posted April 17, 2014 That looks really good and well finished. I assume the belt runs in a way you don't need a reverse-flow water pump...as if they exist for a Stude engine. Link to comment Share on other sites More sharing options...
brad Posted April 17, 2014 Author Report Share Posted April 17, 2014 (edited) Yes, the belt goes from the crank, over the tension pulley, over the blower, and over to the water pump, back down to the crank. There is a second belt behind the front belt that goes from the crank up to the AC clearing the water pump. From there over to the alternator, down to the power steering pump, then back to the crank. If the supercharger gives trouble you can use a shorter belt and bypass the AC and run over the water pump over to the alt, and power steering. I would post more pictures, but I keep getting the message the file is to large to upload. Lew can help me later. Edited April 17, 2014 by brad Link to comment Share on other sites More sharing options...
mfg Posted April 17, 2014 Report Share Posted April 17, 2014 Looks great! Was wondering about the carb with R1 type air filter--and also a supercharger. Will this Stude engine be converted over? Or is that air cleaner just keeping debris out of carb? Link to comment Share on other sites More sharing options...
brad Posted April 18, 2014 Author Report Share Posted April 18, 2014 Yes, it's just keeping dirt out for now....until I make the carb bonnet.....There are two carbs under there . That's right an R4 with a supercharger!!!! (not R4 compression) Link to comment Share on other sites More sharing options...
Guest dapy Posted April 18, 2014 Report Share Posted April 18, 2014 Brad, What car? Link to comment Share on other sites More sharing options...
brad Posted April 19, 2014 Author Report Share Posted April 19, 2014 What car??......some fiberglass POS made by some German manufacturer in Canada.......with an Italian sounding model name. Gimme a while, It will come back to me. Link to comment Share on other sites More sharing options...
brad Posted May 6, 2014 Author Report Share Posted May 6, 2014 Updated pics with belts and stuff. https://www.facebook.com/BezAutoAlchemy/photos/pcb.766499293369347/766499140036029/?type=1&theater Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now