DobbM Posted November 22 Report Posted November 22 Good fall afternoon. I'm trying to figure out a starter issue. My first thought is that the grounding isn't good enough, thus a full circuit is not there. The negative battery terminal goes to the engine (head?, driver's side), then on the other side there's a 10-14 awg wire from the engine block to the frame at the front, passenger engine mounting block. That to me doesn't seem to be beefy enough to handle the current that deals with the starter motor, but rather for all the accessories. I can not see the top of the starter motor to confirm that the cable from the starter solenoid has a tight connection. Is there a larger engine to chassis/frame wire for grounding? A braided one or something?
DobbM Posted November 23 Author Report Posted November 23 This is the front right (passenger) engine mount. Is the only grounding from the engine to the frame?
Murder Posted 4 hours ago Report Posted 4 hours ago "beefy enough to handle the current that deals with the starter motor". It isn't and it doesn't. As you noted, the negative battery terminal is connected to the head or block of the engine by an appropriately sized cable. By virtue of being mechanicaly connected to the engine the starter is connected to a massive ground, thereby completing the circuit. The small cable you point out is not involved in that circuit.
Bob Preston Posted 4 hours ago Report Posted 4 hours ago What is the issue? Completely dead, just a click, cranking slowly…?
mfg Posted 1 hour ago Report Posted 1 hour ago 2 hours ago, Murder said: "beefy enough to handle the current that deals with the starter motor". It isn't and it doesn't. As you noted, the negative battery terminal is connected to the head or block of the engine by an appropriately sized cable. By virtue of being mechanicaly connected to the engine the starter is connected to a massive ground, thereby completing the circuit. The small cable you point out is not involved in that circuit. Agreed… All I’d add is…. on 6V vehicles, which need all the ‘grounding’ they can get, the ground wire is sometimes relocated directly to a starter mounting bolt. Of course, this would not apply to Avantis or any other 12V vehicle.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now