Twin Track / Power Lok rebuilt. Plates and discs.

[Leo B]

My Avanti Twin Track was not working and when I opened it up, I noticed that some plates were missing. So there was no friction.
I ordered new Spicer 22233X kit. Including (per axle): One concave plate 0.095" one plate 0.064", one plate 0.095" and two discs 0.095". Now... The total is too thick.

According to my measurements, if the concave plate is 0.095", then all four should be about 0.060 - 0.064 thick when the concave plate is pressed to about 40-50% preload.

I can find plenty of pages with installation instructions, but I can't find any information on the original thickness of the plates and discs. Do you have any information?