headliner fiberglass replacement, seatbelts

[Greg Stoyer]

Reading the factory manual it seems replacing the front section of the headliner is more straightforward than replacing the rear.  So a number of questions

- Do the panels attach directly to the underside of the roof?   Type of adhesive?

- The rear section - do the rear windshield and side windows need to come out?  any tricks to minimize disassembly or go "straight by the book:"

- Any tips and suggestions are welcomed.

P.S.-- seatbelts  62", 72"  ..... do you use all 72" lengths for all four seats or 62" in the front?

- 

[regnalbob]

This Service Letter may help.

 

 

 

 

 

[Greg Stoyer]

Thanks for the service letter.  That helps clarify some stuff and make it doable.  

[RoyG]

The entire interior of mine was "shot" so I removed it all before pulling the front and rear glass and painting the body (off the frame).  Now it is time to start putting the new interior back in.  I understand some parts of the interior should go in before the glass gets re-installed, and even before the new headliner material?  Starting with the entire inside stripped, and all new boards, headliner, and vinyl what is the correct sequence for the install?