Jim S Posted June 21, 2021 Report Share Posted June 21, 2021 My 87 has small hose that runs from a tee in the heater hose on the driver's side of the engine. It connects to a nipple in the intake manifold under the distributer. I installed an new distributer with the internal coil and this connection interferes with the vacuum advance. Is this hose necessary? I would like to remove it if I can, but I don't know it's purpose. Thanks. Link to comment Share on other sites More sharing options...
DaytonaR2 Posted June 23, 2021 Report Share Posted June 23, 2021 Move your wires around the cap in either direction to make clearance from the vac pot. Move the distributer base in the same direction you move the wires. Then set the timing again. The base does not really care where it is positioned, make it have clearance and adjust timing accordingly Link to comment Share on other sites More sharing options...
Jim S Posted June 23, 2021 Author Report Share Posted June 23, 2021 Between the heater hoses coming out the firewall, the intake manifold and the cruise control stuff, there's few areas to move it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now