Rear disc conversion

[IndyJimW]

Hopped in the 87 Avanti a couple days ago and the drivers rear wheel is locking up when the brakes are applied.

So I went back into the shop, got on the Summit Racing web site and ordered a rear disc brake conversion kit.

Arrived today. Should have them installed by the end of next week if all goes good.

Good luck all,

Jim Wood

[IndyJimW]

This is the kit I purchased. Ordered Tuesday and received on Thursday.

https://www.summitracing.com/parts/RSD-AFXDS78

It comes with the parking brake cables for the Chevrolet G body.

Good luck all,

Jim Wood

Edited June 21, 2021 by IndyJimW

[Thom]

IndyJimW, how did the disc brake conversion go? I just purchased my 1987 Avanti  on 7-28-21 and i am considering the conversion. I am a "Driver" and in no means mechanically inclined so I will definitely have the work done for me.

[IndyJimW]

Shop is quiet so we started the rear brake conversion. Most everything is bolted on. We had to make new brake lines to the brake hoses and weld the brake hose holding tabs to the axle tubes. We're ready to button it up, add the gear oil, bleed the brakes and go for a test drive.

Good luck all,

Jim Wood

[IndyJimW]

My rear disc brake conversion.

Good luck all,

Jim Wood