Gunslinger
-
Posts
3,670 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Gunslinger
-
-
Mine were in bad need of recovering when I purchased them. The upholstery shop I used for many years had trouble finding matching leather for them. Ultimately they found what I wanted from an aircraft upholstery supplier. The shop did a superb job recovering them.
I doubt if you will ever find ready to go covers but if you find matching leather you're ahead of the game.
-
I believe it was an Avanti exclusive seat for Avanti Motors...at least that's what they told me when I purchased a used set of Recaros from a later Avanti I installed in the '70 I owned. Some parts may be more or less universal for Recaro seats but that's about it...and they were about the most comfortable and supportive auto seats I've ever sat in.
Recaro does not have sliders or bases anymore. The sliders are more or less universal and go with Avanti-specific bases. If sliders and bases are what you want information on...contact Wedge Engineering. They have sliders and the Avanti-specific base design and can whip up bases in short order.
-
Since it only does it at a specific speed I would agree with the driveshaft balance theory. Sometimes vibrations balance out after a certain point...something like exhaust would simply change tone or get worse as it strikes the frame.
-
You could always replace the TH400 with a 5- or 6-speed Tremec. Performance and economy! It would take a while to recover the conversion costs but it would be a great swap.
-
That's a smog era engine with a 3-speed automatic...excellent transmission it is...but that's probably about what you can expect from the combination. Without knowing the rear axle ratio you might be able to squeeze out 16mpg if the car is tuned on a computerized machine. Changing the transmission to an automatic overdrive such as a 200R4 or 700R4 will help drop the rpms and improve mileage.
-
I "think" I have some of the Avanti disc labels but everything is in storage since we moved and I won't have access for at least a month.
-
There's no specific Avanti center cap...the generic Magnum 500 cap was used. This is what was used...
Later...aftermarket vendors had center discs made with the Avanti logo you could glue in.
-
Avanti Motors used the stock Magnum 500 cap. Check out Summit Racing or Jegs...they list the caps. They came in several styles depending on whether it going to Ford, AMC, Chrysler or Avanti Motors which used the generic "Magnum 500" center cap.
-
I used the Mr. Goodwrench scissors jack I purchased from Walmart as I said previously. I don't remember the handle it came with but since I used a donut emergency spare instead of a full-size spare tire I had no problems fitting the jack inside the spare tire well as well as other emergency equipment with room to spare.
-
First thing...they should be flat top. If they're dished they're replacements.
-
It would probably be easier and cheaper to go to Walmart or Pep Boys, Auto Zone or other and simply buy a new scissors jack with its own handle. They're not expensive. While it's been some time, I purchased a Mr. Goodwrench scissors jack from Walmart for about $15.00. It fits in the storage compartment the same as the original.
-
Send it to Jon Myer...it will be rebuilt properly and quickly.
-
The difference is offset and different runs of he Magnum 500 wheels by the manufacturer. I put the Turner kit on the '70 I owned and two of the Magnum 500 wheels would contact the caliper and two wouldn't. The difference was a very slight difference in offset between the two pairs. I could only assume they came from two different production runs. Avanti Motors didn't care or bother to check wheels as they were purchased as they only specified 15"x6" standard offset wheels and they easily cleared the original calipers so there was no need to check. I'm sure it was simply an assumption that they were all the same.
-
Contact Jon Myer of Myer’s Studebaker. The last I was there he had a number of parts cars of various model years. He may have one.
-
That car should have the same front brakes as the Studebaker Avanti. I believe by the early '70s there was a change in rear brakes. The Studebaker Parts and Shop Manuals are about all that's available. Avanti Motors never put out anything to replace them.
-
Withdrawn...going into storage while moving.
-
The schematics available are for the Studebaker Avanti as already said. For Avanti II cars...every year changed some in many respects and Avanti Motors make their own wiring harnesses. There years with separate alternator/voltage regulators...years with alternators with integral regulators...different a/c compressors and locations for them...alarm systems options, etc. When flashers were required by law it was an add-on flasher unit wired by splicing it rather than part of the harness. Some years there were options that required an additional harness pigtail and eventually the pigtail was included whether necessary or not to simplify harness making.
I've also seen different Avantis that have some options with activating switches mounted differently...sometimes under the left side of the dash and sometimes under the right side of the steering wheel. My own theory is it depended on the various assembly persons...one guy would wire it one way and someone else wired it the other...very little standardization.
Be very careful when working with Avanti II wiring...mark and tag wires as you work in there.
-
Welcome from not far from you in Maryland! At least for two more weeks when I'm moving to Arizona. There's a pretty fair number of Avanti owners in your area.
-
GM changed its parts numbering system sometime during those years. You might not be able to find a current part number to run down. You may be able to match it up by finding an exploded diagram from a contemporary GM manual online. Once you identify it that way a web search may be able to run one down. If that doesn’t work, try a local Chevy dealer’s parts department. They’re tied in to a nationwide inventory system. It’s possible one or more dealers might have the part gathering dust unsold and could be willing to sell it cheap to get rid of it.
I once had a ‘78 Corvette that needed a new a/c kick up solenoid and the local Chevy dealer’s parts guy found several dealers nationwide that had them in inventory. I called one and talked to the parts manager who gave me a killer price if I bought the two he had. I installed one on my car and sold the other on eBay for more than both cost.
-
If the panel between the seat and gas tank has never been removed there should be sealer slathered over the screws and edges of the panel that will be fun to scrape off to get the panel removed.
-
While not an Avanti part...this book is written by Bob Morrison of Molded Fiberglass which made the Avanti bodies for Studebaker. While not exclusively about the Avanti it does detail the experience his company had with Studebaker and the Avanti project. $25 and I'll pay the shipping.
-
The engine bay received body color paint but didn’t get polished…add engine heat to that and it’s no wonder it has no gloss.
-
The engine bay is body color.
-
Check out #4…
"ll" !
in Avanti Trivia
Posted
Lark V8 emblem.