wire loom

[IdahoBen]

Working on a 63 started but not completed by someone else.  I found the wire loom for the rear of the car laying above the fuel tank with no connector just cut wires.  I found a connector under the dash withe the same wire colors.  From the tank enclosure where did the wire loom exit and where would it have entered into the dash cavity to connect to the rest of the wire loom.  My signal switch and horn wires exit the steering column with bullet connectors on each wire with no corresponding connectors for them to connect to.  There is a unused 6 prong connector with similar but not exact color wires.  was there a missing connector that mated these two together?   Thanks for any information.   Pictures of your wire looms would be appreciated