Air conditioning fan switch

[Dan Williams]

Is there a source for the fan switch? Either the  oem reostat resistor type fan switch or the current 3 speed switch would be ok.

Dan Williams

1972 RQ-B 1882

[AG-R3]

http://www.studebaker-info.org/Tech/Aircon/murray35701.jpg   

Quote

 

[Dan Williams]

Thank you. Do you have a source for the temperature switch

[AG-R3]

You can try this one

https://www.summitracing.com/parts/UAC-SW3004C   

They are also on Amazon

Quote

 

 

[Dan Williams]

Thank you again

[tanda62]

Trying to convert my 63 switches to these newer switches and all the wiring is gone from the car so I a recreating this from scratch.  Do you know which terminal on each switch goes to which wire?  I believe for the fan switch the B terminal is Power In (from the battery), the M terminal is Power Out (to the fan motor) and the O terminal is ground.  The temperature switch terminals are labeled O and L.  I believe one of these goes to the compressor and the other goes to the fan switch but I don't know which is which.  

Thanks,

Tom

Edited Saturday at 03:23 PM by tanda62

[Dan Williams]

I received part no.3004c but it does not have a shaft on it to put the knob so the coolant flow can be adjusted.  What is the correct part no.

Dan

[tanda62]

Dan, try this switch

https://www.amazon.com/UAC-SW-6490C-C-Thermostat/dp/B003R43E0O/ref=sr_1_28?crid=2ENEVV7QDFNRS&dib=eyJ2IjoiMSJ9.GPhk8TpmjpUPixr0JRLAZDDz-AdgnD2NrbLr3Bc6KdZaedltDLCa1V0PoVWm522QMIwZarBw9lonrtfdMWTHVP3OLUCBu0QjCqCVkazbrRhLx3XKBVyvMmVRXHjFPpxdQEkevzZzDw33ttrSj8GbQitJuDUoDu-49Q054qiWbG9PHbTnj4NhsnvVMjAU74Jz.lwWRzcvlO_fi4-ptSjRh8smEh4nB38az3gsCHQqLMcc&dib_tag=se&keywords=automotive+A%2FC+switches&qid=1746385165&sprefix=automotive+a%2Fc+switches%2Caps%2C130&sr=8-28&xpid=fV4ajBeSHMimL

Then please let me know which wire you put on which terminal.

Tom

[ronmanfredi]

Oreilly Auto Parts sells the 3 speed Murray switch which works like a champ.

 

[AG-R3]

On 5/4/2025 at 11:13 AM, Dan Williams said:

I received part no.3004c but it does not have a shaft on it to put the knob so the coolant flow can be adjusted.  What is the correct part no.

Dan

Sorry abt that..  I guess that's why they don't show the front..

[Dan Williams]

That's okay I got a fan switch that works great from O'Reilly and it seems as though The air conditioner now works great so maybe it was just the fan switch that was a problem. But I did receive a link previously in this discussion of the correct switch to get for the temperature gauge if I need it