Air conditioning fan switch

[Dan Williams]

Is there a source for the fan switch? Either the  oem reostat resistor type fan switch or the current 3 speed switch would be ok.

Dan Williams

1972 RQ-B 1882

[AG-R3]

http://www.studebaker-info.org/Tech/Aircon/murray35701.jpg   

Quote

 

[Dan Williams]

Thank you. Do you have a source for the temperature switch

[AG-R3]

You can try this one

https://www.summitracing.com/parts/UAC-SW3004C   

They are also on Amazon

Quote

 

 

[Dan Williams]

Thank you again

[tanda62]

Trying to convert my 63 switches to these newer switches and all the wiring is gone from the car so I a recreating this from scratch.  Do you know which terminal on each switch goes to which wire?  I believe for the fan switch the B terminal is Power In (from the battery), the M terminal is Power Out (to the fan motor) and the O terminal is ground.  The temperature switch terminals are labeled O and L.  I believe one of these goes to the compressor and the other goes to the fan switch but I don't know which is which.  

Thanks,

Tom

Edited 13 hours ago by tanda62