iamrgh Posted August 18 Report Share Posted August 18 Avanti has original 289 and AFB with an Edelbrock electric choke and a Pertronix billet distributor, heat riser removed. Twice after going to a cruise-in after the car has set for a couple of hours, the engine will restart readily and then begin to stumble and die. Then it's really difficult to restart. (usually accomplished by manually holding choke plate closed and flooring accelerator pedal.) Once back on the road, the stumbling stops and it runs well -plenty of power acceleration and idles well at stops. The car usually cold starts well but has caused the same problem at times even on a cold start. I'm no mechanic and am clueless as to how to resolve this problem. Any ideas would be appreciated. Link to comment Share on other sites More sharing options...
mfg Posted August 19 Report Share Posted August 19 Probably time to purchase a zip kit and overhaul carb! Link to comment Share on other sites More sharing options...
silverstude Posted August 19 Report Share Posted August 19 (edited) That what 'mfg' said....... and I'll bet that if you install a manual choke, your experience will be much better. I'm not familiar with an Edelbrock electric choke but the ones I had were energized as soon as you turn the ignition key on. If the engine doesn't start right away, the choke continues to open and you're basically out of options, unless you pour some gas down the carb or turn the key off and wait 15 minutes for the choke coil to get cold again... A long time ago, I had an electric choke kit (1967) that was wired to one of the exhaust manifold bolts to sense engine temps and that would be great for today's cars as it would emulate the original auto choke process. BTW, I saw your car in the Gilmore just last June. Very nice car and a great place.. Edited August 19 by silverstude Link to comment Share on other sites More sharing options...
iamrgh Posted August 22 Author Report Share Posted August 22 On 8/19/2024 at 10:00 AM, silverstude said: That what 'mfg' said....... and I'll bet that if you install a manual choke, your experience will be much better. I'm not familiar with an Edelbrock electric choke but the ones I had were energized as soon as you turn the ignition key on. If the engine doesn't start right away, the choke continues to open and you're basically out of options, unless you pour some gas down the carb or turn the key off and wait 15 minutes for the choke coil to get cold again... A long time ago, I had an electric choke kit (1967) that was wired to one of the exhaust manifold bolts to sense engine temps and that would be great for today's cars as it would emulate the original auto choke process. BTW, I saw your car in the Gilmore just last June. Very nice car and a great place.. Link to comment Share on other sites More sharing options...
iamrgh Posted August 22 Author Report Share Posted August 22 (edited) Thanks for your input, Silver. When removing the air cleaner after the engine stopped, the choke plate was wide open. Edited August 22 by iamrgh Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now