wiper switch

[tanda62]

My wiper switch on my 63 is not operating and from the looks of it someone has been inside it and really made a mess of things.  I have had the wiper motor refurbished so I know it is good.  

So thinking of my options for a new switch I need to understand the motor.  Is this a one speed wiper motor or two speed?  I know with the resistor in the stock switch the motor can run at variable speeds.  Also the wiring, I have figured out the Purple is 12V power, Blue is Park, Black runs the motor and Yellow runs the motor both at the same speed, the Red wire I am not sure about.

Two options for a new switch are:

painless performance 80173 (https://www.summitracing.com/parts/prf-80173?seid=srese1&gclid=CjwKCAjwrcKxBhBMEiwAIVF8rF3w6s_hYsAhZzta2WkVzqJMnKrJBIrmyKQXgc3aWIEUEIfbS_lxMxoCugAQAvD_BwE)

cole hersee 75601 (https://www.amazon.com/Cole-Hersee-75601-14-BX-Switch-Dyn-Brk/dp/B005E9Z6EW?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&psc=1&smid=A6AY1HFZHO49U)

I am also installing a small electric washer motor for the spray option and hope to adapt the original knob to the new switch.

Another thought is to take the switch to a local electric shop and see if they can put new parts inside.

Anyone use either of the suggested switches or is there one someone has adapted for use?

Thanks for any help,

Tom

[wildfelr]