mfg Posted January 16, 2015 Report Posted January 16, 2015 A Studebaker accessory engine block heater for the late 'full-flow' V8's would normally be installed in the 'cold' side (return) heater hose....True?
DEEPNHOCK Posted January 16, 2015 Report Posted January 16, 2015 I say false.Most heater hose block heaters pump through the heater core to help defrost the windshield and warm up the interior quickly.
GlennW Posted January 16, 2015 Report Posted January 16, 2015 need to be heating water, not there, and you want to be heating the water conducting into the block.
Avanti83 Posted January 16, 2015 Report Posted January 16, 2015 Or is this a trick question and it should be installed in a freeze plug hole.
mfg Posted January 16, 2015 Author Report Posted January 16, 2015 Or is this a trick question and it should be installed in a freeze plug hole. AVANTI83 IS SHARP THIS MORNING!!!!!....That's exactly where it was to be installed.....Answer...FALSE!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now