Guest Larry Delazzer Posted June 19, 2015 Report Posted June 19, 2015 Hi, I've been chasing my fanny looking for hose clamps for my 63 Avanti, the ones that are a flat band with a screw going through a captured nut. I know there is some controversy about whether they are correct or not but in looking at engine compartments in old advertising material that is the clamp I see so those are the ones I want. I know they aren't required for judging but that's ok. SI and Myers doesn't have them, any thoughts on where I might purchase some, thanks.
Mike M Posted June 20, 2015 Report Posted June 20, 2015 It's a little strange, but those are actually Ford Model "A" clamps. I think they are supposed to have "A6" stamped on them. It's one of the things mentioned in Stan Gundry's book. The aircraft clamps just don't look right; and they aren't! Mike M.
Guest Larry Delazzer Posted June 21, 2015 Report Posted June 21, 2015 The hose on the Avanti is 2 3/16" or so in diameter, seems big for a model A but I sure don't know. Dave Thibault says he normally carries them and will have more in soon, we'll see and I'll let ya know. Thanks for input.
Guest Larry Delazzer Posted June 21, 2015 Report Posted June 21, 2015 Well, Mike M, you are correct. I just checked a Model A supplier and there they were, the correct clamps. Thanks much. Larry
lschuc Posted December 28, 2016 Report Posted December 28, 2016 http://www.restorationstuff.com/featured6.htmlListed as galvanized steel classic band.Pick your size
JWL1940 Posted December 28, 2016 Report Posted December 28, 2016 I got a set of radiator hose clamps for R4541 at Mac's Model A Parts. Bright plated. (o[]o)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now