RickHC Posted June 5, 2013 Report Posted June 5, 2013 The front parkinglight/turn signal bulb on my '89 with ground effects is burned out. How do I access it? Does the lense snap out? I can't see how to access it from under the car.
Guest dapy Posted June 6, 2013 Report Posted June 6, 2013 Might want to check wire connections to that light before trying to replace bulb. Could be a bad ground.
Avanti83 Posted June 6, 2013 Report Posted June 6, 2013 Most of the ones from this era are a bayonet base that fits into a socket. The socket is usually removed by turning it about a quarter turn and pulling to remove it. Follow the wires with your hand until you reach the socket. Bob
rdmaxon Posted July 23, 2013 Report Posted July 23, 2013 In addition to the good tips previously posted ,you may need to take the bolts/screws out of the bumper fill panel and slide that back to be able to twist and pull the socket out.The sockets are mounted at the top. Or maybe a better way to put it is they are above and behind the lens. That is what I had to do when I replaced mine with new sockets. RD
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now