Project Avanti Posted August 22, 2011 Report Posted August 22, 2011 Does anyone have the shift rods, or shift rod numbers, ( stamped in rods ). for a 63 Avanti? Any help would be appreciated, I assume any Avanti up to 85? with a 4 spd Hurst shifter would use the same rods. Any help would be appreciated.
Avanti83 Posted August 22, 2011 Report Posted August 22, 2011 Does anyone have the shift rods, or shift rod numbers, ( stamped in rods ). for a 63 Avanti? Any help would be appreciated, I assume any Avanti up to 85? with a 4 spd Hurst shifter would use the same rods. Any help would be appreciated. PA Here is the Hurst sheet on the T-10 vs Super T-10. I assume yours is a T-10. The only difference from 74 0n looks like the reverse linkage. http://hurst-shifter...I4&cktime=96655 Why not contact Hurst as they should have the parts for their shifters available. Bob
Project Avanti Posted August 23, 2011 Author Report Posted August 23, 2011 PA Here is the Hurst sheet on the T-10 vs Super T-10. I assume yours is a T-10. The only difference from 74 0n looks like the reverse linkage. http://hurst-shifter...I4&cktime=96655 Why not contact Hurst as they should have the parts for their shifters Hi Bob, Thanks for the link, that was very helpful. Hurst no longer shows those part numbers, or the application, no listing for any year Avanti. Tried their website and tried calling customer service, also the local FLAPS, NO luck. Bought some 3/8" rod and a die. Will post some pictures if I can make some rods that work. Thanks again for the diagram.
Avanti83 Posted August 23, 2011 Report Posted August 23, 2011 PA My 74 ST-10 4-speed is up on the lift receiving some frame work. If all else fails, I can probably pull the 1-3 and 2-4 levers and photo them along side a ruler. Bob
Project Avanti Posted August 23, 2011 Author Report Posted August 23, 2011 (edited) PA My 74 ST-10 4-speed is up on the lift receiving some frame work. If all else fails, I can probably pull the 1-3 and 2-4 levers and photo them along side a ruler Thanks again Bob, pictures would be great, numbers would still be appreciated if you find any. Bob Edited September 8, 2011 by Project Avanti
Project Avanti Posted October 13, 2011 Author Report Posted October 13, 2011 I would like to thank Brad Bez ( and his wife ) for the shift linkage pictures I needed
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now