Jump to content

Blaupunkt Frankfurt


adamderosa

Recommended Posts

I have a Blaupunkt Frankfurt US radio, part number 7632629200 that I've been told was removed from a 1974 Avanti. I'm trying to get it back in working order but I don't have any paperwork for it. Does anyone have the owner's guide or service guide? If so, would it be possible to have a copy e-mailed to me? I've searched on-line for this haven't had any luck.

Thanks,

Adam DeRosa

Link to comment
Share on other sites

Have a look at this page, it appears as though your radio may be listed a little over halfway down the page, but you apparently have to contact them for pricing:

http://www.stereomanuals.com/man/rep/blaupunkt/

Judging from my internet search, it seems Blaupunkt put the Frankfort label on a number of different models over the years.

I have some literature on the Blaupunkt that came in my '80 Avanti, but it doesn't

list a model name, only the model number CR-2001 (a radio with tape cassette that came on a number of foreign cars like Saab, Porsche, etc). I'm not sure this will work, but here's a try at posting a copy of the cover of my pub:

80_Avanti_Radio.jpg

Didn't work, try this link:

http://www.jagsnvettes.com/MiscPhotos/80_Avanti_Radio.jpg

Edited by WayneC
Link to comment
Share on other sites

  • 1 month later...

I have a Blaupunkt Frankfurt US radio, part number 7632629200 that I've been told was removed from a 1974 Avanti. I'm trying to get it back in working order but I don't have any paperwork for it. Does anyone have the owner's guide or service guide? If so, would it be possible to have a copy e-mailed to me? I've searched on-line for this haven't had any luck.

Thanks,

Adam DeRosa

Hi,

I just bought a '74 Avanti II with the original Blaupunkt Frankfurt radio. I have the owner's manual and schematics. Would that help? The owner's manual is very sparse but you can eventually figure out what the English part is saying. I can copy and mail or possibly scan and e-mail though the files would be large if you want high enough resolution to print legibly. My FM works fine though just static on AM. Right now I am looking for a functional if cosmetically challenged radio for parts with the idea that I can identify the AM tuner section and replace that board. I gather from a casual glance at the schematic that there are two circuit boards in the case.

Let me know.

Raymond Compton

Link to comment
Share on other sites

Hi Raymond-

Yes if you could scan and e-mail me your radio manual that would be great! My e-mail address is: adamderosa@yahoo.com. If you're unable to scan it, you can mail a copy to me at 36399 N. Streamwood Drive, Gurnee IL 60031. I will glady pay for the postage, just let me know what it costs.

Thanks a lot!

Adam DeRosa

Link to comment
Share on other sites

Hi Adam,

Give me a couple of days. If the docs scan well enough I will e-mail them, if not, I will mail you a hard copy. I have a high end flat bed scanner so quality is not the problem but file size might be, at least at a quality setting that will print legibly at your end.

No charge, you might be able to help me in the future.

Raymond

Link to comment
Share on other sites

Hi Adam,

I have made nice hard copies of the owner's manual and schematics for the Blaupunkt "Frankfurt" model #7632629. This proved easier than scanning to a high resolution graphic file to e-mail to you. I should get this off to you tomorrow. If you have any ideas as to why my AM section is dead, I would appreciate the input. I recall that my '86 Subaru radio did the same thing, though I just replaced it with a (then new) Alpine CD receiver. This is a bit different though I might put in the new "Frankfurt" look-alike and keep the old one if any future owner would want the "proper" radio for the car.

Raymond

Link to comment
Share on other sites

Hi Raymond-

Yes if you could scan and e-mail me your radio manual that would be great! My e-mail address is: adamderosa@yahoo.com. If you're unable to scan it, you can mail a copy to me at 36399 N. Streamwood Drive, Gurnee IL 60031. I will glady pay for the postage, just let me know what it costs.

Thanks a lot!

Adam DeRosa

Hi Adam,

Your Blaupunkt manual and schematics went out today via First Class Mail. You should have them early next week.

Good luck with your project.

Raymond

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...