studequest Posted March 30, 2020 Report Posted March 30, 2020 A few years ago I replaced the pinion gear in the rear end. Car has been idle for 4 months while engine was rebuilt I noted the speedo was a little skiddish,, but it was accurate based on Freeway speed signs. THEN .,... NOTHING.... likely causes> This is an R1 with automatic. Thanks Keith
1963r2 Posted March 30, 2020 Report Posted March 30, 2020 (edited) Maybe the inner cable has snapped. Check the pinion gear in the gearbox again and check the inner cable at the same time. If all seems well put a drill on the end of the cable and see if the gauge is moving. No movement suggests a gauge issue. pb Edited March 30, 2020 by 1963r2
studequest Posted March 31, 2020 Author Report Posted March 31, 2020 (edited) Yes 1963r2 the inner cable was broken 2 feet down line. The speedo dial turns so apparently gauge is ok Edited March 31, 2020 by studequest spelling
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now