Jump to content

Ed M

AOAI Forum Members
  • Posts

    38
  • Joined

  • Last visited

Everything posted by Ed M

  1. My '81 (RBQ-3318) got a very nice paint job courtesy of the previous owner, but they forgot to weatherstrip the doors - I've lived with the wind noise for a while. The car is in to my excellent mechanic for installation of new ones. With all of your help, I ordered some mid-80's Monte Carlo pieces, but it turned out that did not include the ones on the body at the windows - he got some late 60's Camaro pieces to do that. I thought at the same time I would replace the stiff and cracked wing vent seals, so ordered them from Avanti Parts. My mechanic started to install them and noticed they did not include the vertical seal at the back of the vent window, just the one that forms angled front of the window and the bottom. So I had to order them separately. When I used the driver's side power window, if I held the switch too long it would make a horrendous clank at the top like a slipping gear. I thought it might be a faulty shutoff. My mechanic discovered that the fiberglass interior piece of the door was cracked right up the center and when the window got to the top, the break would separate and the gear would slip. He fashioned a small strip of steel bar and bolted it on and solved the problem. While he was into the doors I had him put some Dynamat in there. Hopefully I will soon have a quiet car Ed M
  2. Here is the gas cap on my 81, RBQ-3318 - click left and right, 2 shots https://www.flickr.com/photos/ruby1638/51205400771/in/dateposted-public/ I, too, have a sunroof but wish I didn't. I ran across several articles on dealing with them. Apparently the guides that the glass panel uses when it opens come unglued from the bottom of the fibergass top so there is a method to get them glued back up that does not look too difficut. Where does your sunroof leak on the inside? Here is one of the articles https://studebaker-info.org/Tech/lampman_moonroof.html Ed M
  3. Replaced them on my '81 (RBQ 3318) last fall. Got them from Avanti Parts and Restorations, their part ## 800340 and 800341 at $14.50 each, and spring kit ##800794 at $15.00. I also put on new shoes, ##800343 at $50.00, and a master cylinder ##800278 at $95.00. Brakes are very good now.
  4. Thanks Wayne - got what appear to be very nice ones from Mr. Ziff
  5. I need a source for the gaskets that surround the small wing windows on my '81 - RBQ 3318.
  6. Thanks Bob - very helpful. What year was the Monte Carlo kit from?
  7. Thanks all. Is the only difference in the door of an 81 vs an 87 that the glass has no metal frame? Does someone have experience with this fix on an earlier Avanti II? Ed M
  8. Thanks - for the whole door X 2 we are looking at $1,000. Is there some other option? I remember reading somewhere that an 87 Impala or Monte Carlo (?) fit well.
  9. My '81 (RBQ 3318) has a new interior and a nice paint job, but the doors whistle like crazy above 35 MPH and they leak air all around. Looks like someone randomly glued some weatherstrip on the doors after the paint job Is there a source for door weatherstrip that fits? I have searched the forum, but nothing comes up Ed M
×
×
  • Create New...