Door Window Outer Weatherseal

[BillyBob]

OK, so the reason I have the door trim panel off is to find a way to secure the weatherseal screw at the rear edge of the door ("hole 1" on Body Section, p13 of Avanti Workshop Manual).  I'm thinking of thinning epoxy with rubbing alcohol and working it into the oversized hole.  Will it work?  I don't know.  Have also thought of drilling hole larger to accept a screw anchor, as might be used in dry wall.  Thoughts?

[Charlie Kile]

   If you're thinning Epoxy DON'T USE RUBBING ALCOHOL! It's Isopropyl Alcohol and contains  30% water !!  

  Use DENATURED ALCOHOL available at any hardware or home improvement store at a low price.

     Charlie RQB3921