Jump to content

lupo

AOAI Forum Members
  • Posts

    10
  • Joined

  • Last visited

Previous Fields

  • My Avanti
    1970 RQB1548

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

lupo's Achievements

Newbie

Newbie (1/14)

  • One Year In
  • Collaborator Rare
  • First Post
  • Conversation Starter
  • Week One Done

Recent Badges

0

Reputation

  1. I've had this display for 30 years. 18 years people rubed their thumb and fingers over it and wore it smooth. No rust creepage and leveled up the pitting. Lacquer primer and paint over it.
  2. Let's start with cavity wax. Waxoyl, Fluid film, Eastwood's cavity wax are petroleum distillates that contain calcium sulfate. Originally it was used for plates on bridges to prevent corrosion between the two pieces of steel. It is also a lubricant has grease consistency it should be applied yearly. Por-15 was developed from the Mobay Bridge aluminum pigmented moisture cured primer. KBS coatings was a por-15 dealer who lost their distributorship when por-15 went nationally and they copied everything that por-15 did. If you want to seal your inner frame and hog troughs acid treat itmetal prep with zinc them follow it up 3 coats of the aluminum pigmented moisture cured urethane. To give you a comparison zinc phosphate epoxy primer three coats wIll do between 500 to 700 hours of salt fog. Mobay's primer 14000 and if it's scratched the rust doesn't travel beyond the chip. Invest in a Harbor Freight engine cleaning gun this little sprayer will blow paint and rust remover about 3 ft. great forgetting into all your hard-to-reach places.
  3. Permanent rust sealer contains moisture cured resin to block moisture. Aluminum flake is what used to cut off the oxygen. It is the most powerful industrial primer there is. When it moved to the automotive market somebody got the bright idea to substitute black pigment for the aluminum flake. treat all your metal with metal prep and follow it up to 2/3 coats of the aluminum pigmented moisture cured urethane.I've been involved in Industrial Coatings for over three decades , I started selling paint out of the back of my Avanti at car shows since 1988
  4. Need help, I have a 70 Avanti with air conditioning would like to bring back to original with fan belts and the Idler pulleys which I still have. IF someone can post a photograph I would appreciate it . thank you
×
×
  • Create New...