63stick Posted March 3 Report Posted March 3 When i first started this project, I came across a small wood block on rear deck by fuel filler tunnel. About 1 1/2" square, hole in middle about 3/8 - 1/2' thick. I saved it for some reason, and recently when I removed the padded sections under the sun visors, I came across the same blocks, spacers for the visors to anchor through. So where does the one I found on the rear deck go. Only thing off when I started in the rear was the vinyl piece over the fuel tunnel, as a matter of fact that vinyl piece was not there. Believe it's in a bin, hopefully.
Guy Posted Monday at 02:58 PM Report Posted Monday at 02:58 PM The wood blocks under the sunvisors are spacers and are glued to the window frame, the block at the gas filler tube is also glued in place but its function is to give you something to put a screw into other than the filler neck.
63stick Posted Thursday at 03:51 AM Author Report Posted Thursday at 03:51 AM Thanks guy, Thanks for responding. What screw would go into it, for what.
Guy Posted Thursday at 02:59 PM Report Posted Thursday at 02:59 PM To hold padded fill neck cover in place, at least thats how both of my avantis are
63stick Posted Friday at 04:33 AM Author Report Posted Friday at 04:33 AM The cover was off when I started this project. I must have removed it and put in in a bin in 1990. Hopefully I get my ok to put up my garage from the town tomorrow. Then I can start laying things out.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now