Greg Stoyer Posted February 5 Report Share Posted February 5 Reading the factory manual it seems replacing the front section of the headliner is more straightforward than replacing the rear. So a number of questions - Do the panels attach directly to the underside of the roof? Type of adhesive? - The rear section - do the rear windshield and side windows need to come out? any tricks to minimize disassembly or go "straight by the book:" - Any tips and suggestions are welcomed. P.S.-- seatbelts 62", 72" ..... do you use all 72" lengths for all four seats or 62" in the front? - Link to comment Share on other sites More sharing options...
regnalbob Posted February 5 Report Share Posted February 5 This Service Letter may help. Link to comment Share on other sites More sharing options...
Greg Stoyer Posted February 6 Author Report Share Posted February 6 Thanks for the service letter. That helps clarify some stuff and make it doable. Link to comment Share on other sites More sharing options...
RoyG Posted March 17 Report Share Posted March 17 The entire interior of mine was "shot" so I removed it all before pulling the front and rear glass and painting the body (off the frame). Now it is time to start putting the new interior back in. I understand some parts of the interior should go in before the glass gets re-installed, and even before the new headliner material? Starting with the entire inside stripped, and all new boards, headliner, and vinyl what is the correct sequence for the install? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now