grobb284 Posted March 4, 2010 Report Posted March 4, 2010 Parts are from 1982 Avanti II, should be suitable for Studebaker Avanti and some R series Larks. Frame, good condition, needs repair at very rear. $425 Front Dunlop brake caliper assemblies, $125 set. Front rotors, $50 set Dana 44, suitable for Avanti, has radius rod mounts, flanged axle rear end, with drum brakes $350 (Less expensive than a set of flanged axles) Set of Avanti radius rod for rear end, $70 Set of rear springs, $65 Rear sway bar and vertical mounts $50 Front sway bar $50 Front coil springs, $50 set Power steering valve and cylinder, $150 Steering box and mount, not Ross $75 Upper and lower A-arms, both sides $125 set King pin and knuckle assemblies, $175 set. Bellcrank, pivot shaft assembly, and steering arms, $125 Or, if you act quickly, you can buy all the above as a group for substantial savings, $1300 Also available: 1982 Avanti II 200R4 transmission, $125 Removed from Avanti II, running 1985 Chevy 350 5.7L with one piece seal and hydraulic roller cam, complete with Avanti II accessories and brackets, exhaust manifolds. $450 Set of Avanti II Recaro front seats, poor conditon, need foam and recovered $375 I need garage space, so these items need to go.
GAWen Posted March 4, 2010 Report Posted March 4, 2010 Do you have the front bumper mounting brackets for both sides, and if so, what will you take for them ?? What about any interior trim pieces ?? George
grobb284 Posted March 5, 2010 Author Report Posted March 5, 2010 George, Have recently sold front bumper brackets. I am still going through the interior items for what I need. Send me an email through the forum for what you need. Best regards, gene
grobb284 Posted March 18, 2010 Author Report Posted March 18, 2010 Sale are pending on the 200r4 transmission. The Recaro seats (rough condition) and the 350 hydraulic roller cam engine (good condition) are still available.
grobb284 Posted March 31, 2010 Author Report Posted March 31, 2010 200r4 transmission is sold, all other items still available.
BruceMC Posted March 31, 2010 Report Posted March 31, 2010 Where are you located and do you still have the frame and 5.7L engine?
grobb284 Posted April 1, 2010 Author Report Posted April 1, 2010 Yes, all items except transmission still available. They are located near Dayton, Ohio, about 15 minutes form Fairborn Studebaker.
grobb284 Posted April 9, 2010 Author Report Posted April 9, 2010 In addition to the 200r4 transmission, the steering gear, power steeing valve and slave cylinder have been sold. All other listed parts in first post are still available.
Bobk Posted April 20, 2010 Report Posted April 20, 2010 Parts are from 1982 Avanti II, should be suitable for Studebaker Avanti and some R series Larks. Frame, good condition, needs repair at very rear. $425 Front Dunlop brake caliper assemblies, $125 set. Front rotors, $50 set Dana 44, suitable for Avanti, has radius rod mounts, flanged axle rear end, with drum brakes $350 (Less expensive than a set of flanged axles) Set of Avanti radius rod for rear end, $70 Set of rear springs, $65 Rear sway bar and vertical mounts $50 Front sway bar $50 Front coil springs, $50 set Power steering valve and cylinder, $150 Steering box and mount, not Ross $75 Upper and lower A-arms, both sides $125 set King pin and knuckle assemblies, $175 set. Bellcrank, pivot shaft assembly, and steering arms, $125 Or, if you act quickly, you can buy all the above as a group for substantial savings, $1300 Also available: 1982 Avanti II 200R4 transmission, $125 Removed from Avanti II, running 1985 Chevy 350 5.7L with one piece seal and hydraulic roller cam, complete with Avanti II accessories and brackets, exhaust manifolds. $450 Set of Avanti II Recaro front seats, poor conditon, need foam and recovered $375 I need garage space, so these items need to go. Hi do you have a good grill, and do you have a right side air door (vent door)
resolver Posted June 4, 2010 Report Posted June 4, 2010 Bobk, Your last post of 04-20 still lists the power steering cylinder. Still available? Thanx
Recommended Posts
Archived
This topic is now archived and is closed to further replies.