RQ-B1899
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by RQ-B1899
-
-
I would like to know the engine angle of a stock small block Chevy engine in a 1972 Avanti II.
I recently put a ZZ383 and a Tremec TKO-600 in my car and I don't know if my engine angle is correct.
Thank you in advance for this information!
Terry Stinehelfer
Bucyrus, OH
-
I have a 1972 Avanti II with a rear window defogger that no longer works.
Is there a replacement motor or unit that would fit in the opening?
Does anyone sell the blower motor in the plastic "box" like the one that came on the car?
Thank you very much for your assistance!!!
-
I would like to replace the "rubbery feel" steering wheel on my 1972 Avanti II with some sort of custom unit like Grant or LeCarra.
Has anyone done this? What kind of column adapter kit did you use? I like the look of my stock steering wheel but the grain is
pretty much smoothed out on most of it.
Any advice or help would be greatly appreciated.
Thank you very much!!
Terry Stinehelfer
-
Would my 1972 Avanti II small block Chevy require a long or short water pump?
I do not have the old water pump to measure or make a comparison.
Thank you very much for the information!!!
-
What is the maximum amount a 1972 Avanti II rear brake drum can be turned and still be within safe tolerances?
Thank you in advance for the information.
-
I'm working on the wiring on my 1972 Avanti II and I have a question about the green with black tracer wire that goes from the passenger side solenoid terminal up into the wiring harness. I discovered that this green with black tracer wire had been cut about two or three feet into the harness and goes
nowhere. Where should this wire go and what is its function?
Thank you very much for your assistance!!!
Terry
-
I would like to know if all the small block Chevy engines installed in Avanti II's were black
or were any ever painted Chevy orange from the factory?
Thanks in advance for the infornmation!!
-
I am trying to remove the underdash portion of the air conditioner in my 1972 Avanti II
and I don't know how to do it. (I don't even know the proper name for this part!!)
Surely I don't have to cut the console to remove it.
Also, what are the relatively small flex hoses that run through the front part of the console?
Thanks in advance for your help!!!
Terry
-
Would anybody know the part number of an Avanti four speed shift
handle (the chrome part that the shift knob screws onto)?
Do any of the vendors have these available?
Thank you very much for the information!!
-
Thanks for all of the great information.
I really appreciate your taking the time to answer my questions.
I'm sure I'll be asking more later.
-
I am the owner of a 1972 Avanti II with a factory four speed and I am doing some cleaning and detailing
underneath the car. I have a couple of questions. It appears that I have 3 fuel lines running back to the
gas tank and I am not sure what the function of that many lines would be. I would also like to know if my
car has flanged axles.
Thank you very much for sharing your knowledge.
Wheel well vent openings in fenders?
in 1963-64 Avanti
Posted
Would it be possible for someone to post a picture of these vent openings?
I am considering adding them to my Avanti II and it would be a big help
to see what they look like.
Thank you very much!!!