Jump to content

Avantir4

AOAI Forum Members
  • Posts

    7
  • Joined

  • Last visited

Posts posted by Avantir4

  1. Wayne  -took the header with the switches out was looking for another issue i had  , when i put the header back up to tighten the bolts i saw a spark. Got out of the car to look at the head lights with the switch on and nothing , no head lights or parking lights.The weird part is i had turn signals,instrument lights,tail lights, so talked with Michael Meyer , he said the heater switch, and the instrument switch was the same , try switching them , so i did and after that i had nothing, no tail lights, no turn signals ,no instrument lights , head lights or parking lights. , so back to the original switch, and had tail lights, turn signals and instrument lights. So back to the drawing board.

  2. Dave here with the 69 Avanti with Electrical issue,  have a shop manual and  have the electrical diagram, took the heater switch out and moved it over to where the headlight switch is at.  have nothing no headlights,tail lights ,parking lights. Tonight put the original switch in and back to having head lights, parking lights tail lights. so i will play with it another day and keep you two posted. Thanks for your help and input very much appreciated.

  3. Have a 69 Avanti , took apart the overhead switch panel , and didnt have the battery disconnected, learned my lesson there. what a dumb a---, any way i have no head lights and no parking lights, have tail lights, turn signals and brake lights. Took the switch that operates the a/c out and put it where the head light switch was , now i have nothing . Im thinking i shorted a wire , and going to have to pull all of the wire out after disconnecting the battery , and rewire . 

    Would like to have some input?

    Thanks

  4. Hey there, I have a 69 Avanti with the 327. I purchased a power steering pump bracket from corvette central after receiving I went out to the garage and went to put it on and the bracket sits to low, the rod coming off the control valve that goes to the bell crank assembly will hit the bracket for the power steering pump. now I am stumped. Has anyone been in my similar situation, and what works.

    Thanks

    David

×
×
  • Create New...