Jump to content

1967 Avanti II 327 Corvette flexplate


hrhchazman

Recommended Posts

I need to order a new flexplate for my 67 Avanti II with a 327 Corvette engine. There are 2 available. One has 153 teeth, the other 168. One guy told me I need one, another guy told me I need the other. It's 24 degrees in my garage, does anybody know for sure which one is correct? I don't have a flywheel turning tool, and I really don't feel like climbing under there and counting the teeth while trying to turn the thing with a screwdriver (in 24 degree weather)

WOW! It's been over a week and no replies, so I'm guessing nobody knows the answer to this ?????

Edited by hrhchazman
Link to comment
Share on other sites

  • 3 weeks later...

Sorry for the lack of replies .. I started to give up logging into this forum

since no one posted ...

I never heard of GM using two different flexplates. I would assume that

the part would have a number on it, or some other distingishing feature.

You could measure the distance between the teeth on the gear, and then

go to the parts store and measure the new part.

Tom

Link to comment
Share on other sites

get one from sasco in south bend it has a bog warner trany in so it might be diff. from chevy

Sorry for the lack of replies .. I started to give up logging into this forum

since no one posted ...

I never heard of GM using two different flexplates. I would assume that

the part would have a number on it, or some other distingishing feature.

You could measure the distance between the teeth on the gear, and then

go to the parts store and measure the new part.

Tom

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...