DTM1 Posted November 10, 2017 Report Share Posted November 10, 2017 New member/owner I have the Nardi Torino steering wheel and it is some what sloppy( left/right- up-down movement. Is there a bushing that needs replaced. Thanks in advance for any help. Dan Link to comment Share on other sites More sharing options...
WayneC Posted November 11, 2017 Report Share Posted November 11, 2017 I doubt the issue has anything to do with the Nardi steering wheel itself, unless it was improperly mounted, but probably the only way to find the problem is to remove the steering wheel and start wiggling things to find loose or worn parts. Your steering wheel likely has a Nardi or Momo adapter to mate the aftermarket steering wheel to the original steering column, and those screws could be loose. Or the issue could be in the steering shaft bearings & bushings at the top and/or bottom of the steering shaft. The shop manual shows those bearings and provides instructions for disassembly/reassembly; if you don't own one, you should get one, along with an Avanti parts catalog (eBay or Avanti parts vendors). Link to comment Share on other sites More sharing options...
DTM1 Posted November 11, 2017 Author Report Share Posted November 11, 2017 Thank you for the reply. I have the shop manual coming, I will order the parts catalog. Dan Link to comment Share on other sites More sharing options...
dynolou2 Posted November 19, 2017 Report Share Posted November 19, 2017 If your car has a GM tilt column there are some screws in it that sometimes loosen up which will give up and down movement. Gm mechanics should be familiar with the fix, BE Sure that you specify they use loctite on the screws. BTDT. Lou Cote Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now