Zedman Posted October 23 Report Posted October 23 (edited) Just wanting to put it out there that it might be prudent to put some demand on our suppliers. I have recently been on a hunt for replacement cylinders for the rear drum brakes if my 1981 Avanti II. On researching, it appears that 13/16" cylinders to suit are starting to have the dreaded "Discontinued line" and "Low Stock" attached to various suppliers like Jegs, Summit etc. I have ordered Ford Mustang 1968 V8 cyls (13/16" bore) from a mustang specialist here in Australia and will be trying these for fit- they are ostenibly correct, but ya never know. This site has a lot of good info on interchangeability just in case others might want the info.... https://www.dormanproducts.com/p-15271-w37782.aspx?origin=keyword Edited October 23 by Zedman
billsr2 Posted November 13 Report Posted November 13 Repopps were available but I chose to have mine sleeved. Cheaper & original
Zedman Posted November 15 Author Report Posted November 15 On 11/13/2024 at 12:28 PM, billsr2 said: Repopps were available but I chose to have mine sleeved. Cheaper & original Hi Bill- I share your sentiments ! Unfortunately re-sleeving here in Oz seems to have become a limited business... not many shops do this work and often "charge like wounded bulls". One mob in South Australia (they do most of the work for various shops) quote a three week turn around and freight on top plus kickbacks were well into three hundred bucks for the pair. ) I did get a quote back from on e fellow in a regional area that said he couldn't do 'em because sleeving material in that size wasn't available (either that or he had nil stock). He did mention that he'd do other cyls for $80 (Australian), which is pretty reasonable. However- The mustang Cylinders are IDENTICAL Dorman products and were postage paid from Sydney to Melbourne overnight for barely a hundred bucks all in- i.e. an obvious choice. I gotta stress, though, that we get absolutely fleeced for car parts here in Oz- Stateside prices are cheep !
mfg Posted November 15 Report Posted November 15 Off topic……...Hi Zedman! … if you happen to know Brian Grenall from Victoria, please tell him ‘mfg’….(Ed) said hello…. Thanks!
Zedman Posted November 28 Author Report Posted November 28 On 11/16/2024 at 1:03 AM, mfg said: Off topic……...Hi Zedman! … if you happen to know Brian Grenall from Victoria, please tell him ‘mfg’….(Ed) said hello…. Thanks! Will do !
mfg Posted November 29 Report Posted November 29 (edited) 14 hours ago, Zedman said: Will do ! Thanks much! … Brian’s auto restoration abilities has always very much impressed me! Edited November 29 by mfg Added text
billsr2 Posted yesterday at 02:54 AM Report Posted yesterday at 02:54 AM Zed, have you found a solution? Perhaps I could buy a pair of sleeves here and sent therm? Couldn't cost much to ship and someone on that side of the planet should be able to manage them??
Zedman Posted 2 hours ago Author Report Posted 2 hours ago On 12/7/2024 at 1:54 PM, billsr2 said: Zed, have you found a solution? Perhaps I could buy a pair of sleeves here and sent therm? Couldn't cost much to ship and someone on that side of the planet should be able to manage them?? Yep solved it- thanks for the offer Bill; waaay cheaper to replace the cyls with the units the Mustang parts sellers have..
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now