goldhawk
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by goldhawk
-
-
Just need to know if there is a hidden nut up inside the trunk area where the antenna comes down. The top nut just keeps spinning and spinning, and only have about an 1/8" opening between the outer car body and the antenna base. Anybody know if there is a nut down under?
-
Need help in removing rear antenna on a 1963 avanti. I am able to turn the outside antenna nut, and it came up about an 1/8", it just keeps turning and nothing happens. Is their a nut on the underside? I am unable to see up inside the hole for a possible nut. Anybody run into this?
-
I just finished putting rebuilt 289 R1 with Powershift transmission into my 1963 Avanti. This transmission has two linkage rods to connect from transmission to the shifter (or maybe somewhere else). It is very obvious where the longer transmission linkage bar goes, but not the shorter one that has a smaller linkage attachment. No problem hooking it up to the transmission bar on the transmission - where does the other end go??? I see nothing on the console shifter linkage where the other end attaches. Anybody know where it goes, or where the other end attaches to?
Thanks in advance, Rich
-
Billy Shears, Did you ever get a suitable headliner for your Avanti? Thanks in advance, Rich Childers richchiders@hotmail.com
-
What is required to remove the wiper linkage for the 1963 avanti? It looks like a special clip is holding the linkage to the motor.
Removing 1963 Avanti antenna
in 1963-64 Avanti
Posted
I am trying to remove old broken antenna on my 1963 avanti with a new electric antenna replacement. I can't seem to remove the old one, the top nut just keeps spinning and spinning. I'm not sure if there is a hidden nut on the bottom, inside the antenna cavity in the trunk that I need to grasp. I can't see up there to see if a nut is spinning. Anyone had this problem of removing an old antenna?