lupo
-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by lupo
-
-
-
The number stamped on the right side chassis rail is 2825 r
-
Thisis is the chassis that I have for sale it has 56,000 Mi on it the dashboard is in good shape has a hairline crack from the corner of the speaker to the top call 973 945 6849 for more info thank you
-
Frame and hog trough protection I was fortunate enough to pick up a rust free chassis last year that had been primed with epoxy primer. This is a video that my friend Mark and I did. This system is excellent for boxed chassis and hog troughs
-
Thanks for the help got it together
-
Just now, lupo said:
I've had this display for 30 years. 18 years people rubed their thumb and fingers over it and wore it smooth. No rust creepage and leveled up the pitting. Lacquer primer and paint over it.
-
-
Let's start with cavity wax. Waxoyl, Fluid film, Eastwood's cavity wax are petroleum distillates that contain calcium sulfate. Originally it was used for plates on bridges to prevent corrosion between the two pieces of steel. It is also a lubricant has grease consistency it should be applied yearly. Por-15 was developed from the Mobay Bridge aluminum pigmented moisture cured primer. KBS coatings was a por-15 dealer who lost their distributorship when por-15 went nationally and they copied everything that por-15 did. If you want to seal your inner frame and hog troughs acid treat itmetal prep with zinc them follow it up 3 coats of the aluminum pigmented moisture cured urethane. To give you a comparison zinc phosphate epoxy primer three coats wIll do between 500 to 700 hours of salt fog. Mobay's primer 14000 and if it's scratched the rust doesn't travel beyond the chip. Invest in a Harbor Freight engine cleaning gun this little sprayer will blow paint and rust remover about 3 ft. great forgetting into all your hard-to-reach places.
-
Permanent rust sealer contains moisture cured resin to block moisture. Aluminum flake is what used to cut off the oxygen. It is the most powerful industrial primer there is. When it moved to the automotive market somebody got the bright idea to substitute black pigment for the aluminum flake. treat all your metal with metal prep and follow it up to 2/3 coats of the aluminum pigmented moisture cured urethane.I've been involved in Industrial Coatings for over three decades , I started selling paint out of the back of my Avanti at car shows since 1988
-
Need help, I have a 70 Avanti with air conditioning would like to bring back to original with fan belts and the Idler pulleys which I still have. IF someone can post a photograph I would appreciate it . thank you
-
I could use the stainless steel console trim as I seem to have lost mine somewhere. Headlight buckets if they're not pitted I could use them also. 973 945 6849 my name is Pat . thanks
-
I'll try to get a picture out to you tomorrow. There is no interior in this car only a console , tilt steering wheel , and crash panels.
-
I've got one off the 66 a long piece and a short one is that what you're looking for?
-
Thank you for your response unfortunately those panels are missing . sorry I couldn't help with that Pat
-
Parting out a 66 Avanti , front fenders quarters are fine , console and dash are in good shape the chassis was restored . For further info call 973 945 6849 my name is Pat
Avanti chassis for sale
in Avanti Parts
Posted
Chassis complete with front end 56,000 miles before the restoration.I also have a dana rear Also have a Dashboard 973-945-6849