Ed M
-
Posts
38 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Ed M
-
-
Avanti history seems to be a moving target. He says the Avanti II was first produced in 1982, but my 1981 has a II on the front.
-
Ted
You mentioned that the color was a special order. I visited the factory a number of times in 68-69-70 while going to school in South Bend. They offered any color paint and any interior, and that was carried to extremes on a car I saw - maybe 70? - that was school bus yellow with a black and white zebra striped interior
-
-
I went to school in South Bend '66-70 and visited the plant a few times (took me 50 years to get one just last year) and didnl't think there were more then maybe 30 or so that you could see
-
Thanks all
I might just go with the 2 cable ties and cut them each time I show the car
Ed
-
New to Avanti - have 3318, a 1981. Maryland I where live requires a front plate, but the car did not come with a bracket. I bought one of those rubberized magnets and stuck it to the bottom of the bumper, but it comes off at 10 MPH. What does everyone do about this?
I was thinking of a couple of cable ties around the bumper, then cut them off when I am at a car show, then cable tie it back on for the trip home
Thanks
Ed
-
Here is a '77 with 5 days left to go on BaT. Frame is suspect.
-
I have an '81 (3318) in need of door seals. Has anyone tried this on a pre'83 since September??
Thanks
Ed
-
Thanks SS
Ed
-
My car was in the shop - just got it back and I am completing my profile. RQB 3318 is the serial number. Bob Johnstone's site lists a couple of options for the bushings - thanks.
Short story: I went to school in South Bend from 66-70. In 68 I found the Avanti factory and would go down and watch from a viewing station as they hand assembled a few cars at a time. There was one that was school bus yellow with a zebra striped black and white interior. By the time I left I wanted on of these cars. Every 10 years or so I would look at what was available, but never pulled the trigger. Well I recently looked again and found this one that had a new engine, new paint and new interior at a very reasonable price. My lovely wife said "you've wanted one of these for 50 years, you better buy it" - so I did. Having a great time on the Eastern Shore of Maryland.Ed Minch
-
I am new to Avanti's - got an '81 6 weeks ago. I have a great mechanic who has gone over the car, replaced and repaired a couple of minor items, and pronounced it ready for a cross-country trip if I decide to do that.
One thing it needs are control arm bushings - he can't find them anywhere. Where can I get 4 control arm bushings for an '81 Avanti II
Ed M
-
Just joined today and this is the first thread I am looking at - hope this interchange is not representative. I have an '81 but it is the shop so I can't go look
Brakes
in 1965-83 Avanti
Posted
I have a 1981, #3318, and I need a brake master cylinder, 2 rear wheel cylinders, and rear brake shoes. Is there more information that I need to order them? Are there a couple of your favorite suppliers that you can recommend?
Many thanks - I love driving my rural Maryland area these beautiful days
Ed